相关论文: Laue Lens Development for Hard X-rays (>60 keV)
The development of three-dimensional (3D) non-destructive X-ray characterization techniques in home laboratories is essential for enabling many more researchers to perform 3D characterization daily, overcoming the limitations imposed by…
Imaging of the Bragg reflected x-ray beam is proposed and validated as an in-situ method for characterization of performance of double-crystal monochromators under the heat load of intense synchrotron radiation. A sequence of images is…
Periodic multilayers are nowadays widely used to perform x-ray analysis in the soft x-ray range (photon energy lower than 1 keV). However, they do not permit to obtain high-resolution spectra like natural or synthetic crystals. Thus,…
A metasurface lens (meta-lens) bends light using nanostructures on a flat surface. Macroscopic meta-lenses (mm- to cm-scale diameter) have been quite difficult to simulate and optimize, due to the large area, the lack of periodicity, and…
Wide field-of-view (FOV) optics are widely used in various imaging, display, and sensing applications. While conventional wide FOV optics rely on cascading multiple elements to suppress coma and other aberrations, it has recently been…
We demonstrate that vacuum forming of 10-cm diameter silicon wafers of various crystallographic orientations under an x-ray permeable, flexible window can easily generate spherically bent crystal analyzers (SBCA) and toroidally bent crystal…
We derive a partial-wave (Mie) expansion of the axial force exerted on a transparent sphere by a laser beam focused through a high numerical aperture objective. The results hold throughout the range of interest for practical applications.…
An electron plasma lens is a cost-effective, compact, strong-focusing element that can ensure efficient capture of low-energy proton and ion beams from laser-driven sources. A Gabor lens prototype was built for high electron density…
First imaging results are obtained with a new CCD mosaic prototype (3K x 3k, 15 \mu m pixels). The CCDs are aligned using an etched socket alignment technique. Three different measurements of the alignment are made using star images, test p…
The spaceborne laser emission telescope is a core and critical component of the space gravitational wave detection system.Compared with ground-based telescopes, the on-orbit space environment is more complex and harsh, presenting higher…
Possibilities for the measurement of the longitudinal structure function in diffraction $F_\mathrm{L}^\mathrm{D}$ at the future US Electron Ion Collider are investigated. The sensitivity to $F_\mathrm{L}^\mathrm{D}$ arises from the…
Knowledge gained through X-ray crystallography fostered structural determination of materials and greatly facilitated the development of modern science and technology in the past century. Atomic details of sample structures is achievable by…
In this article, we report a lens design based on a concentric circular structure with continuous changing of thickness defined in a thin plate structure for focusing a plane wave into three spots (triple focusing) and for splitting elastic…
Sub-wavelength resolution imaging requires high numerical aperture (NA) lenses, which are bulky and expensive. Metasurfaces allow the miniaturization of conventional refractive optics into planar structures. We show that high-aspect-ratio…
We presents the results of study of focusing and imaging properties of double-lens system for hard x-ray radiation consisting of two Fresnel zone plates (ZP) made from silicon. We demonstrate for the first time the phenomenon of focusing by…
Crystalline phase structure is essential for understanding the performance and properties of a material. Therefore, this study identified and quantified the crystalline phase structure of a sample based on the diffraction pattern observed…
We demonstrate a laser-driven, tunable electron lens fabricated in monolithic silicon. The lens consists of an array of silicon pillars pumped symmetrically by two 300 fs, 1.95 $\mu$m wavelength, nJ-class laser pulses from an optical…
Passive optical elements can play key roles in photonic applications such as plasmonic integrated circuits. Here we experimentally demonstrate passive gap-plasmon focusing and routing in two-dimensions. This is accomplished using a high…
In this paper we investigate x-ray and $\gamma$-ray propagation in crystals having a constant strain gradient and flat or cylindrical surfaces. When a displacement field is present, we solve the Takagi-Taupin equations either by the…
We present an X-ray photometric analysis of six gravitationally lensed quasars, with observation campaigns spanning from 5 to 14 years, measuring the total (0.83 - 21.8 keV restframe), soft (0.83 - 3.6 keV), and hard (3.6 - 21.8 keV) band…