相关论文: Surface Contact Approximation for Magneto-Thermal …

For finite element (FE) analysis of no-insulation (NI) high-temperature superconducting (HTS) pancake coils, the high aspect ratio of the turn-to-turn contact layer (T2TCL) leads to meshing difficulties which result in either poor quality…

Thermal transient responses of superconducting magnets can be simulated using the finite element (FE) method. Some accelerator magnets use cables whose electric insulation is significantly thinner than the bare electric conductor. The FE…

Understanding the thermal behaviour of superconducting accelerator magnets is essential to ensure their stable and reliable operation. This work presents an extension of the Finite Element Quench Simulator (FiQuS) Multipole module to…

Thin layers can lead to unfavorable meshes in a finite element (FE) analysis. Thin shell approximations (TSAs) avoid this issue by removing the need for a mesh of the thin layer while approximating the physics across the layer by an…

This paper presents a novel finite-element approach for the electromagnetic modeling of superconducting coated conductors. We combine a thin-shell (TS) method to the $H$-$\phi$ formulation to avoid the meshing difficulties related to the…

Numerical models based on the finite-element method (FEM) are popular tools for investigating the macroscopic electromagnetic behavior of high-temperature superconductor (HTS) applications. This article explains how to use the $T$-$A$…

Parallel-wound no-insulation (PW-NI) high-temperature superconducting (HTS) coils significantly reduce charging delay while maintaining excellent self-protection capability, demonstrating great potential for high-field applications.…

Modelling high temperature superconductor (HTS) motors remains challenging mainly due to the high aspect ratio of these conductors but also because of the properties of the magnetic materials. This paper presents a 2D time dependent model…

The modeling and analysis of superconducting coils is an essential task in the design stage of most devices based on high-temperature superconductors (HTS). These calculations allow verifying basic estimations and assumptions, proposing…

We make progress towards a 3D finite-element model for the magnetization of a high temperature superconductor (HTS): We suggest a method that takes into account demagnetisation effects and flux creep, while it neglects the effects…

A new module, Pancake3D, of the open-source Finite Element Quench Simulator (FiQuS) has been developed in order to perform transient simulations of no-insulation (NI) high-temperature superconducting (HTS) pancake coils in 3-dimensions.…

The multi-physics coupling behaviours of HTS coils have now received much attention. In particular, the electromagnetic field, temperature field and mechanical deformation interact with each other during quench of high-field magnets.…

The estimation of losses in high-temperature superconductors (HTS) is fundamental during the design of superconducting devices since losses can strongly influence the cooling system requirements and operating temperature. Typically, 2D…

Superconducting-proximity topological insulators (STIs) have garnered significant research attention over the past two decades. In this Letter, we demonstrate that a low-dimensional STI in the topological-nontrivial phase (TP) exhibits an…

High temperature superconducting (HTS) stacks of coated conductors (CCs) can work as strong trapped field magnets (TFMs) and show potential in electrical applications. Pulsed field magnetization (PFM) is a practical method to magnetize such…

In the following paper we investigate the critical temperature $T_c$ behavior in the two-dimensional S/TI (S denotes superconductor and TI - topological insulator) junction with a proximity induced in-plane helical magnetization in the TI…

Protecting a high temperature superconducting (HTS) magnet from a quench event is a challenging task. Because of the slow normal zone propagation velocity, the long reliable quench detection method by directly monitoring coil voltage may…

REBCO high-temperature superconductors are promising for fully superconducting high-field magnets, including ultra-high field magnets. Non-insulated (NI) and metal-insulated (MI) windings are a good solution for protection against…

In their article, Zhang et al. [Phys. Rev. B 86, 024516 (2012)] present a remarkable result for A$_x$(S)$_y$TiNCl compounds ($\alpha$-phase TiNCl partially intercalated with alkali A and optionally co-intercalated molecular species S),…

Superconducting topological crystalline insulators (TCI) are predicted to host new topological phases protected by crystalline symmetries, but available materials are insufficiently suitable for surface studies. To induce superconductivity…