相关论文: Integration and characterization of Readout Electr…

To achieve the sensitivity required to detect signals from neutral hydrogen from the Cosmic Dawn and Epoch of Reionisation it is critical to have a well-calibrated instrument which has a stable calibration over the course of the…

We report an experimental study of a Si/SiGe double quantum dot (DQD) directly coupled to a niobium superconducting coplanar stripline (CPS) microwave resonator. This hybrid architecture enables high-bandwidth dispersive readout suitable…

The next generation of collider experiments require tracking detectors with extreme performance capabilities in terms of spatial resolution (tens of $\mu \text{m}$), radiation hardness ($10^{17}~1~$MeV n$_{eq}/$cm$^2$) and timing resolution…

We present measurements with a GEM based TPC prototypes and the TimePix CMOS ASIC as charge collecting anode. Tests with a small prototype were performed in a 5 GeV electron beam at DESY. Different GEM orientations and geometries were…

The concept of a hybrid readout of a time projection chamber is presented. It combines a GEM-based amplification and a pad-based anode plane with a pixel chip as readout electronics. This way, a high granularity enabling to identify…

Waveform digitizers are key readout instruments in particle physics experiments. In this paper, we present a waveform digitizer for the PandaX dark matter experiments. It supports both external-trigger readout and triggerless readout,…

Efficient readout of nitrogen-vacancy (NV) centers in diamond is crucial for various quantum information technologies. However, achieving high-fidelity, single-shot readout at room temperature remains challenging due to limited photon…

Detecting the topology and direction of low-energy nuclear and electronic recoils is broadly desirable in nuclear and particle physics, with applications in coherent elastic neutrino-nucleus scattering, astrophysical neutrino measurements,…

Digital correlated double sampling (DCDS), a readout technique for charge-coupled devices (CCD), is gaining popularity in astronomical applications. By using an oversampling ADC and a digital filter, a DCDS system can achieve a better…

We present a detailed description of the drift chambers used as an active target and a tracking device in the NOMAD experiment at CERN. The main characteristics of these chambers are a large area, a self supporting structure made of light…

A drift mode accelerometer is a precision device that overcomes the much of the acceleration noise and readout dynamic range limitations of traditional electrostatic accelerometers. It has the potential of achieving acceleration noise…

Transition-edge sensor (TES) is a highly sensitive device that is capable of detecting extremely low levels of energy. It is characterised by low noise performance and high energy resolution. A mature method for reading out TES signal is…

Optically addressable electron spin clusters are of interest for quantum computation, simulation and sensing. However, with interaction length scales of a few tens of nanometers in the strong coupling regime, they are unresolved in…

Noise-induced control imperfection is an important problem in applications of diamond-based nano-scale sensing, where measurement-based strategies are generally utilized to correct low-frequency noises in realtime. However, the spin-state…

The superconducting nanowire single photon detector (SNSPD) is a leading technology for quantum information science applications using photons, and they are finding increasing uses in photon-starved classical imaging applications. Critical…

Silicon spin qubits based on metal-oxide-semiconductor (MOS) technology are compatible with semiconductor manufacturing and offer a route to scalable quantum processing. However, spin readout typically relies on proximal charge sensors,…

A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an…

In semiconductor spin quantum bits (qubits), the radio-frequency (RF) gate-based readout is a promising solution for future large-scale integration, as it allows for a fast, frequency-multiplexed readout architecture, enabling multiple…

Efficient readout of individual electronic spins associated with atom-like impurities in the solid state is essential for applications in quantum information processing and quantum metrology. We demonstrate a new method for efficient spin…

The BULLKID-DM experiment aims to detect WIMP-like potential Dark Matter particles with masses below 1 GeV/c^2. Sensing these particles is challenging, as it requires nuclear recoil detectors characterized by high exposure and an energy…