相关论文: Steady cone-jet mode of electrospray for single-ce…
The liquid cone-jet mode can be produced upon stimulation by a co-flowing gas sheath. Most applications deal with the jet breakup, leading to either of two droplet generation regimes: jetting and dripping. The cone-jet flow pattern is…
An electrohydrodynamic numerical model is used to explore the electrospray emission behavior of both moderate and high electrical conductivity liquids under electrospray conditions. The Volume-of-Fluid method, incorporating a…
We propose using a dielectric beveled nozzle for electrospray and electrohydrodynamic jet printing. This nozzle stabilizes the liquid ejection of low-conductivity liquids, considerably reducing the minimum flow rate below which the flow…
We investigate the physical mechanisms governing the continuous transition from the droplet-dominated to the ion-dominated regime in electrosprays of highly conducting liquids. We characterize electrosprays of four ionic liquids using…
Electrospray technology enables external electric fields to steer charged droplets, with potential applications in fuel-air mixing and aerodynamic flow control. This study develops a computational framework that couples a steady OpenFOAM…
Electrospraying is a widely-used technique for generating microspherical droplets in biomedical and chemical applications and considered as an effective approach for the deposition on substrate. However, studies on effects of controllable…
The production of monodisperse particles or droplets is a longstanding issue across various fields, from aerosol science to inkjet printing. In bioengineering, submillimeter cell laden hydrogel capsules have proven valuable for developing…
This study demonstrates the feasibility of using smaller capillary emitters to achieve higher specific impulse ($I_\text{sp}$) in electrospray propulsion. Four ionic liquids were characterized using capillary emitters with tip diameters…
Wearable electronic devices and gadgets raise the need for flexible, thin and lightweight batteries. In this article we present for the first time, a unique, single-step method for the preparation of a membrane-electrode assembly for…
The purpose of this article is to explore the role of viscoelastic properties of polymeric solutions on the jet mode in the electrospray process. In this research, several numerical simulations were performed to model the behavior of…
A modified electron beam induced deposition method using a parallel beam of electrons is developed. The method relies on the build-up of surface potential on an insulating surface exposed to an electron beam. Presence of sharp edges on the…
We have produced superstable compound liquid microjets with a three-dimensional printed coaxial flow-focusing injector. The aqueous jet core is surrounded by a shell, a few hundred nanometers in thickness, of a low-concentration aqueous…
Electrohydrodynamic modeling and experimental observations indicate that the ion evaporation current emitted by passively-fed electrospray sources is independent of the electrical conductivity of the ionic liquid. This contrasts with…
We report dynamic and coagulation properties of a dispersion of polyelectrolyte multilayer microcapsules filled with solutions of a strong polyelectrolyte. The capsule self-diffusion coefficient in the vicinity of the wall is measured using…
Analytical equations were found for interdigitated electrodes, which considered reversible electrode reactions and pure diffusion within confined spaces. A conformal transformation, obtained by the use of Jacobian elliptic functions, was…
Focused electron beam induced deposition of pure materials from aqueous solutions has been of interest in recent years. However, controlling the liquid film in partial vacuum is challenging. Here we modify the substrate to increase control…
Additive microfabrication processes based on localized electroplating enable the one-step deposition of micro-scale metal structures with outstanding performance, e.g. high electrical conductivity and mechanical strength. They are therefore…
The development of reversible metal anodes is a key challenge for advancing aqueous battery technologies, particularly for scalable and safe stationary energy storage applications. Here we demonstrate a strategy to realize epitaxial…
Electroporation method is a useful tool for delivering drugs into various diseased tissues in the human body. As a result of an applied electric field, drug particles enter the intracellular compartment through the temporarily permeabilized…
It is shown that surface conduction can stabilize electrodeposition in random, charged porous media at high rates, above the diffusion-limited current. After linear sweep voltammetry and impedance spectroscopy, copper electrodeposits are…