相关论文: Hemispherical Angular Power Mapping of Installed m…
This paper presents an automated measurement methodology for angular received-power characterization of embedded millimeter-wave transmitters using geometry-calibrated spatial sampling. Characterization of integrated mmWave transmitters…
Millimeter-wave (mmWave) frequency bands are expected to be used for future 5G networks due to the availability of large unused spectrum. However, the attenuation at mmWave frequencies is high. To resolve this issue, the utilization of high…
An indoor layout sensing and localization system in 60GHz millimeter wave (mmWave) band, named mmReality, is elaborated in this paper. The mmReality system consists of one transmitter and one mobile receiver, each with a phased array and a…
Millimeter wave (mmWave) localization algorithms exploit the quasi-optical propagation of mmWave signals, which yields sparse angular spectra at the receiver. Geometric approaches to angle-based localization typically require to know the…
With millimeter wave wireless communications, the resulting radiation reflects on most visible objects, creating rich multipath environments, namely in urban scenarios. The radiation captured by a listening device is thus shaped by the…
Millimeter-wave (mmW) radars are being increasingly integrated in commercial vehicles to support new Adaptive Driver Assisted Systems (ADAS) for its ability to provide high accuracy location, velocity, and angle estimates of objects,…
5th Generation Mobile Network Systems(5G systems) operating in milli-meter Wave (mmW) bands will employ base stations with integrated Active Antenna Systems (AASs) capable of beam-tracking using narrow beams obtained from array antennas…
The tremendous bandwidth available in the millimeter wave (mmW) frequencies between 30 and 300 GHz have made these bands an attractive candidate for next-generation cellular systems. However, reliable communication at these frequencies…
The future 5G networks are expected to use millimeter wave (mmWave) frequency bands, mainly due to the availability of large unused spectrum. However, due to high path loss at mmWave frequencies, coverage of mmWave signals can get severely…
In this article, we address the timely topic of cellular bistatic simultaneous localization and mapping (SLAM) with specific focus on end-to-end processing solutions, from raw I/Q samples, via channel parameter estimation to user equipment…
In existing communication systems, the channel state information of each UE (user equipment) should be repeatedly estimated when it moves to a new position or another UE takes its place. The underlying ambient information, including the…
Large antenna arrays and millimeter-wave (mmWave) frequencies have been attracting growing attention as possible candidates to meet the high requirements of future 5G mobile networks. In view of the large path loss attenuation in these…
Characterizing self-interference is essential to the design and evaluation of in-band full-duplex communication systems. Until now, little has been understood about this coupling in full-duplex systems operating at millimeter wave (mmWave)…
Demonstrating the feasibility of large antenna array beamforming is essential for realizing mmWave communication systems. This is due to the dependency of these systems on the large array beamforming gains to provide sufficient received…
The commercial availability of low-cost millimeter wave (mmWave) communication and radar devices is starting to improve the penetration of such technologies in consumer markets, paving the way for large-scale and dense deployments in…
Omnidirectional path loss models are vital for radiosystem design in wireless communication systems, as they allow engineers to perform network simulations for systems with arbitrary antenna patterns. At millimeter-wave frequencies, channel…
We present measurements and analysis of self-interference in multi-panel millimeter wave (mmWave) full-duplex communication systems at 28 GHz. In an anechoic chamber, we measure the self-interference power between the input of a…
Indoor areas, such as offices and shopping malls, are a natural environment for initial millimeter-wave (mmWave) deployments. While we already have the technology that enables us to realize indoor mmWave deployments, there are many…
Millimeter wave (mmWave) technology is expected to be a major component of 5G wireless networks. Ultra-wide bandwidths of mmWave signals and the possibility of utilizing large number of antennas at the transmitter and the receiver allow…
Millimeter wave (mmWave) technology is expected to dominate the future 5G networks mainly due to large spectrum available at these frequencies. However, coverage deteriorates significantly at mmWave frequencies due to higher path loss,…