相关论文: Efficient and affordable thermoelectric measuremen…
We explore the possibility to perform an in-situ transmission electron microscopy (TEM) thermoelectric characterization of materials. A differential heating element on a custom in-situ TEM microchip allows to generate a temperature gradient…
An in-house Seebeck coefficient measurement system has been developed which can measure the thermoemf (Seebeck coefficient) of the sample, under large temperature difference, in the temperature range 300-600 K. Unlike majority of reported…
Thermoelectricity is the direct conversion of temperature gradient to electric voltage, and vice-versa. There are several potential applications of thermoelectricity, ranging from clean noiseless cooling, to waste-power harvesting in…
We developed a simple, flexible, low-cost, and computer-controlled cryogenic temperature measurement system for undergraduate instructional laboratories. An Arduino microcontroller board measures the voltage across a silicon diode to…
At the ultra-thin limit below 20 nm, a film's electrical conductivity, thermal conductivity, or thermoelectricity depends heavily on its thickness. In most studies, each sample is fabricated one at a time, potentially leading to…
A Seebeck coefficient measurement apparatus has been designed and developed, which is very effective for accurate characterization of different type of samples in a wide temperature range (80 - 650K) simultaneously covering low as well as…
The paper describes a method for measuring the thermal diffusivity of materials having a high thermal conductivity. The apparatus is rather simple and low-cost, being therefore suitable in a laboratory for undergraduate students of…
Recent advances in the synthesis of inorganic and organic nanowires and nanotubes have provided both components for various functional devices and platforms for the study of low- dimensional transport phenomena. However, tremendous…
In this work, we report the fabrication of a high temperature measurement setup to measure Figure of merit (ZT). This setup facilitates the simultaneous measurement of Seebeck coefficient ({\alpha}), thermal conductivity (\kappa), and…
This work builds on the previous introduction [1] of a coupled experimental-computational system devised to fully characterize the thermal behavior of complex 3D submicron electronic devices. The new system replaces the laser-based surface…
In this paper we investigate the effect of strong electronic interactions on the thermoelectric properties of a simple generic system, consisting of a single correlated layer sandwiched between two metallic leads. Results will be given for…
In this work, we report the fabrication of fully automated experimental setup for high temperature Seebeck coefficient ({\alpha}) measurement. The K-type thermocouples are used to measure the average temperature of the sample and Seebeck…
Thermoelectric materials intrigue much interest due to their wide range of application such as power generators and refrigerators. The efficiency of thermoelectric materials is quantified by the figure of merit, and a figure greater than…
A simple apparatus for the measurement of Seebeck coefficient ($\alpha$) in the temperature range 300-620 K has been fabricated. Our design is appropriate for the characterization of samples with different geometries like disk and rod…
In a recent article [Phys. Rev. Applied 5, 024005 (2016)], Gibelli and coworkers proposed a method to determine the thermopower, i.e. the Seebeck coefficient, using photoluminescence measurements. The photoluminescence spectra are used to…
Thermoelectric devices that utilize the Seebeck effect convert heat flow into electrical energy and are highly desirable for the development of portable, solid state, passively-powered electronic systems. The conversion efficiencies of such…
The usually negligibly small thermoelectric effects in superconducting heterostructures can be boosted dramatically due to the simultaneous effect of spin splitting and spin filtering. Building on an idea of our earlier work [Phys. Rev.…
Heavily doped semiconductors are by far the most studied class of materials for thermoelectric applications in the past several decades. They have Seebeck coefficient values which are 2-3 orders of magnitude higher than metals, making them…
Thermoelectric devices convert temperature gradients into electrical power and vice versa, thus enabling energy scavenging from waste heat, sensing and cooling. Yet, many of these attractive applications are hindered by the limited…
Thermoelectric materials can be used to construct devices which recycle waste heat into electricity. However, the best known thermoelectrics are based on rare, expensive or even toxic elements, which limits their widespread adoption. To…