相关论文: A Unidirectionally Connected FAS Approach for 6-DO…

The previously introduced aerial manipulation systems suffer from either limited end-effector DOF or small payload capacity. In this dissertation, a quadrotor with a 2-DOF manipulator is investigated that has a unique topology to enable the…

This thesis introduces a novel quadrotor manipulation system that consists of 2-link manipulator attached to the bottom of a quadrotor. This new system presents a solution for the drawbacks found in the current quadrotor manipulation system…

This work addresses the practical problem of distributed formation tracking control of a group of quadrotor vehicles in a relaxed sensing graph topology with a very limited sensor set, where only one leader vehicle can access the global…

We propose a control protocol based on the prescribed performance control (PPC) methodology for a quadrotor unmanned aerial vehicle (UAV). Quadrotor systems belong to the class of underactuated systems for which the original PPC methodology…

Fin actuators can be used for for both thrust generation and vectoring. Therefore, fin-driven autonomous underwater vehicles (AUVs) can achieve high maneuverability with a smaller number of actuators, but their control is challenging. This…

This letter proposes a method to integrate auxiliary actuators that enhance the task space capabilities of commercial underactuated systems, leaving the internal certified low level controller untouched. The additional actuators are…

Co-simulation is a critical approach for the design and analysis of complex cyber-physical systems. It will enhance development efficiency and reduce costs. This paper presents a co-simulation framework integrating ROS 2 and MATLAB/Simulink…

This paper presents a novel design for finite-time position control of quadrotor Unmanned Aerial Vehicles (UAVs). A robust, finite-time, nonlinear feedback controller is introduced to reject bounded disturbances in tracking tasks. The…

The quadrotor is a $6$ degrees-of-freedom (DoF) system with underactuation. Adding a spherical pendulum on top of a quadrotor further complicates the task of achieving any output tracking while stabilizing the rest. In this report, we…

Safe stabilization is a significant challenge for quadrotors, which involves reaching a goal position while avoiding obstacles. Most of the existing solutions for this problem rely on optimization-based methods, demanding substantial…

This paper presents contributions on nonlinear tracking control systems for a quadrotor unmanned micro aerial vehicle. New controllers are proposed based on nonlinear surfaces composed by tracking errors that evolve directly on the…

A Nonlinear PID (NLPID) controller is proposed to stabilize the translational and rotational motion of a 6-DOF UAV quadrotor system and enforce it to track a given trajectory with minimum energy and error. The complete nonlinear model of…

Over the past several decades there has been a constant increase in the use of Unmanned Aerial Systems (UAS). Hence, there has also been a growth in the number of control algorithms to service the many applications embodied by these…

Visual control enables quadrotors to adaptively navigate using real-time sensory data, bridging perception with action. Yet, challenges persist, including generalization across scenarios, maintaining reliability, and ensuring real-time…

This paper deals with the dynamics and controls of a quadrotor unmanned aerial vehicle that is connected to a fixed point on the ground via a tether. Tethered quadrotors have been envisaged for long-term aerial surveillance with high-speed…

This paper proposes a model predictive trajectory tracking approach for quadrotors subject to input constraints. Our proposed approach relies on a hierarchical control strategy with an outer-loop feedback generating the required thrust and…

This paper proposes a cascaded control framework for quadrotor trajectory tracking with formal safety guarantees. First, we design a controller consisting of an outer-loop position model predictive control (MPC) and an inner-loop nonlinear…

In the paper "Control Design for UAV Quadrotors via Embedded Model Control" [1], the authors designed a complete control unit for a UAV Quadrotor, based on the Embedded Model Control (EMC) methodology, in combination with the Feedback…

This paper addresses the problem of designing a trajectory tracking control law for a quadrotor UAV, subsequent to complete failure of a single rotor. The control design problem considers the reduced state space which excludes the angular…

This paper provides nonlinear tracking control systems for a quadrotor unmanned aerial vehicle (UAV) that are robust to bounded uncertainties. A mathematical model of a quadrotor UAV is defined on the special Euclidean group, and nonlinear…