相关论文: Two-level system loss characterization of NbTi sup…
Superconducting coplanar waveguide (SCPW) resonators with high internal quality factors (\Q_i) are essential for quantum information applications, but suffer severe Qi degradation under magnetic fields due to quasiparticle generation and…
Superconducting quantum computing architectures comprise resonators and qubits that experience energy loss due to two-level systems (TLS) in bulk and interfacial dielectrics. Understanding these losses is critical to improving performance…
The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material candidate for applications in superconducting quantum technology. However, NbN-based devices and circuits are…
Superconducting coplanar waveguide resonators are essential components in quantum processors, where their internal quality factor (Qi) constrains qubit coherence and readout fidelity. In niobium devices, microwave losses at millikelvin…
We designed and successfully fabricated an absorption-type of superconducting coplanar waveguide (CPW) resonators. The resonators are made from a Niobium film (about 160 nm thick) on a high-resistance Si substrate, and each resonator is…
Quantum sensing and computation can be realized with superconducting microwave circuits. Qubits are engineered quantum systems of capacitors and inductors with non-linear Josephson junctions. They operate in the single-excitation quantum…
We present microwave-frequency NbTiN resonators on silicon, systematically achieving internal quality factors above 1 M in the quantum regime. We use two techniques to reduce losses associated with two-level systems: an additional substrate…
In a number of recent experiments with microwave high quality superconducting coplanar waveguide (CPW) resonators an anomalously weak power dependence of the quality factor has been observed. We argue that this observation implies that the…
Advancing large-scale quantum computing requires superconducting circuits that combine long coherence times with compatibility with semiconductor technology. We investigate niobium nitride (NbN) coplanar waveguide resonators integrated with…
We present measurements and simulations of superconducting Nb co-planar waveguide resonators on sapphire substrate down to millikelvin temperature range with different readout powers. In the high temperature regime, we demonstrate that the…
Characterizing superconducting microwave resonators with highly dissipative elements is a technical challenge, but a requirement for implementing and understanding the operation of hybrid quantum devices involving dissipative elements, e.g.…
Superconducting resonators are widely used in many applications such as qubit readout for quantum computing, and kinetic inductance detectors. These resonators are susceptible to numerous loss and noise mechanisms, especially the…
Two-level systems (TLS) are known to be a dominant source of dissipation and decoherence in superconducting qubits. Superconducting resonators provide a convenient way to study TLS-induced loss due to easier design and fabrication in…
The performance of superconducting circuits for quantum computing is limited by materials losses. In particular, coherence times are typically bounded by two-level system (TLS) losses at single photon powers and millikelvin temperatures.…
We present a systematic analysis of the internal losses of superconducting coplanar waveguide microwave resonators based on niobium thin films on silicon substrates. In particular, we investigate losses introduced by Nb/Al interfaces in the…
As superconducting kinetic inductance detectors (KIDs) continue to grow in popularity for sensitive submillimeter detection and other applications, there is a drive to advance toward lower-loss devices. We present measurements of diagnostic…
Material research is a key frontier in advancing superconducting qubit and circuit performance. In this work, we develop a simple and broadly applicable framework for accurately characterizing two-level system (TLS) loss using internal…
High-quality factor microwave resonators operating in a magnetic field are a necessity for some quantum sensing applications and hybrid platforms. Losses in microwave superconducting resonators can have several origins, including…
We report on the fabrication and characterization of superconducting coplanar waveguide (CPW) resonators based on titanium nitride (TiN) thin films deposited on 200\,mm diameter high-resistivity Si(100) substrates. We systematically…
Superconducting coplanar waveguide (SCPW) resonators have a wide range of applications due to the combination of their planar geometry and high quality factors relative to normal metals. However, their performance is sensitive to both the…