相关论文: Flexible Perovskite/Silicon Monolithic Tandem Sola…
Fully-textured perovskite/silicon tandem solar cells have emerged as promising candidates for next-generation photovoltaics. The optical functions of full texturing, however, are not yet fully understood. A key challenge is the requirement…
The power conversion efficiency of the market-dominating silicon photovoltaics approaches its theoretical limit. Bifacial solar operation with harvesting additional light impinging on the module back and the perovskite/silicon tandem device…
Among various types of perovskite-based tandem solar cells (TSCs), all-perovskite TSCs are of particular attractiveness for building- and vehicle-integrated photovoltaics, or space energy areas as they can be fabricated on flexible and…
In this study, the optoelectronic properties of a monolithically integrated series-connected tandem solar cell are simulated. Following the large success of hybrid organic-inorganic perovskites, which have recently demonstrated large…
Perovskite/Si tandem solar cells have the potential to considerably out-perform conventional solar cells. Under standard test conditions, perovskite/Si tandem solar cells already outperform the Si single junction. Under realistic…
Perovskite-silicon tandem solar cells are currently one of the most investigated concepts to overcome the theoretical limit for the power conversion efficiency of silicon solar cells. For monolithic tandem solar cells the available light…
We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 %…
Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline…
Fully printed flexible perovskite solar cells (f-PSCs) show great potential for the commercialization of perovskite photovoltaics owing to their compatibility with high-throughput roll-to-roll (R2R) production. However, the challenge…
Perovskite-organic tandem solar cells (P-O TSCs) hold great promise for next-generation thin-film photovoltaics, with steadily improving power conversion efficiency (PCE). However, the development of optimal interconnecting layers (ICLs)…
The widespread use of lead-based materials in tandem solar cells raises critical environmental and health concerns due to their inherent toxicity and risk of contamination. To address this challenge, we focused on lead-free tandem…
As single junction thin-film technologies, both Si heterojunction (HIT) and Perovskite based solar cells promise high efficiencies at low cost. One expects that a tandem cell design with these cells connected in series will improve the…
Tandem perovskite solar cells beckon as lower cost alternatives to conventional single junction solar cells, with all-perovskite tandem photovoltaic architectures showing power conversion efficiencies up to 26.4%. Solution-processing…
All-perovskite tandem solar cells promise high photovoltaic performance at low cost. So far however, their efficiencies cannot compete with traditional inorganic multi-junction solar cells and they generally underperform in comparison to…
We report a proof-of-concept two-terminal perovskite/Cu(In, Ga)Se2 (CIGS) monolithic thin-film tandem solar cell grown on ultra-thin (30-microns thick), light-weight, and flexible polyimide foil with a steady-state power conversion…
There are recent investigations regarding tandem solar cells with a top perovskite cell and a bottom silicon one with a potential of > 25% power conversion efficiency. Because of still high production costs of silicon cells it is believed…
The significant surge in energy use and escalating environmental concerns have sparked worldwide interest towards the study and implementation of solar cell technology. Perovskite solar cells (PSCs) have garnered remarkable attention as an…
As photovoltaics (PVs) scale from one to multiple terawatts over the next decade, ensuring sustainable deployment is urgently required. Crystalline silicon (c-Si) PVs, the current industry standard, will generate an estimated 160 million…
Hybrid perovskite solar cells, with their power conversion efficiency (PCE) exceeding 22%, have been representing a revolutionary concept for future energy power generation. Although listed among the Top 10 Emerging Technologies of 2016,…
Perovskite solar cells have shown power conversion efficiencies (PCE) comparable to cystalline silicon solar cell despite involving low-temperature, solution based synthesis processes outside clean room environment. As the theoretical PCE…