相关论文: Power Swing Trajectory Influenced by Virtual Imped…

Grid-forming (GFM) inverter-based resources (IBRs) are capable of emulating the external characteristics of synchronous generators (SGs) through the careful design of the control loops. However, the current limiter in the control loops of…

This paper investigates power swing characteristics of grid-forming voltage source converter (GFM-VSC) systems considering the current limitation mode in both non-inertial and inertial GFM-VSC systems. Following grid faults, non-inertial…

Due to the energy crisis and environmental pollution, the installed capacity of inverter-based resources (IBRs) in power grids is rapidly increasing, and grid-following control (GFL) is the most prevalent at present. Meanwhile, grid-forming…

Inverter-based resources (IBRs) are a key component in the ongoing modernization of power systems, with grid-forming (GFM) inverters playing a central role. Effective fault current limiting is a major challenge to modernizing power systems…

Grid-forming (GFM) inverters can significantly alter the fault characteristics of power systems, which challenges the proper function of protective relays. This paper gives a holistic analysis of the interaction between GFM inverter-based…

This paper investigates how grid-forming (GFM) and grid-following (GFL) control strategies in inverter-based resources (IBRs) influence line distance and differential protection in converter-dominated transmission systems. A modified IEEE…

Differing from synchronous generators (SGs), grid-forming inverter-based resources (GFM-IBRs) exhibit rapid variations in their output impedances during transmission line faults due to the overcurrent limitation. As a result, the source…

This paper proposes a novel control framework designed for Inverter-Based Resources (IBRs), denoted as Generalized Swing Control (GSC). The proposed GSC framework generalizes the definition of Grid-Forming (GFM) control schemes and exploits…

The increasing penetration of inverter-based resources (IBRs) has fundamentally altered the transient stability characteristics of modern power systems. IBRs typically rely on proportional--integral (PI) controllers for synchronization and…

Power flow oscillations can occur in power systems after major disturbances such as system faults, which may result in significant power swings and even lead to system collapse. This paper provides a detailed analysis of the efficacy of the…

When grid-forming (GFM) inverter-based resources (IBRs) face severe grid disturbances (e.g., short-circuit faults), the current limitation mechanism may be triggered. Consequently, the GFM IBRs enter the current-saturation mode, inducing…

Grid-forming (GFM) capability requirements are increasingly imposed on grid-connected voltage-source converters (VSCs). Under large grid disturbances, GFM-VSCs need to remain stable while providing GFM services. Yet, such objectives, as…

The fault characteristics of inverter-based resources (IBRs) are different from conventional synchronous generators. The fault response of IBRs is non-linear due to saturation states and mainly determined by fault ride through (FRT)…

Modern power systems increasingly demand converter-driven generation systems that integrate seamlessly with grid infrastructure. Grid-based converters are particularly advantageous, as they operate in harmony with conventional synchronous…

In traditional views, the build-up of accelerating energy during faults can cause the well-known first-swing angle instability in synchronous generators (SGs). Interestingly, this letter presents a new insight that the accumulation of…

Future power systems will include high shares of inverter-based generation. There is a general consensus that for allowing this transition, the Grid-Forming (GFM) control approach would be of great value. This article presents a GFM control…

This paper investigates the transient stability of power systems co-dominated by different types of grid-forming (GFM) devices. Synchronous generators (SGs and VSGs) and droop-controlled inverters are typical GFM devices in modern power…

Grid-connected inverters are required to operate stably under a wide range of grid conditions. However, conventional grid-following (GFL) control may suffer from instability under weak-grid conditions, while grid-forming (GFM) control may…

Inverter-based resources (IBRs) are becoming increasingly prevalent in power systems. Due to the inherently low inertia of inverters, there is a heightened risk of disruptive voltage oscillations. A particular challenge in the operation of…

This paper employs modal analysis to study the core inertial dynamics of governor-controlled synchronous generators (GC-SG), droop-based grid-forming (GFM) converters, and their most fundamental interactions. The results indicate that even…