相关论文: Performance Analyses of the Newly Developed Operat…

The proposed delta-sigma modulator ($\Delta\Sigma$M) based signal acquisition architecture uses a differential difference amplifier (DDA) customized for dual purpose roles, namely as instrumentation amplifier and as integrator of…

A prototype of a very high dynamic range 32-bits Digital to Analog Converter (DAC) was designed and built for the purpose of direct auditory stimulus generation. It provides signals from less than 100 nV up to 50 Watts peak power output,…

A field-effect transistor (FET) amplifier for small voltage signals is presented. Its design is elementary and the construction can be afforded by anyone. Despite its simplicity, with a voltage noise less than 1 nV/sqrt(Hz), it outperforms…

The coax based MO distribution system in the ALS is going to be replaced by a modernized, lower phase noise and more interference tolerant version, ready to support ALS-U operation. System aspects are shown and several commercial analog and…

Analog-to-digital converters (ADCs) facilitate the conversion of analog signals into a digital format. While the specific designs and settings of ADCs can vary depending on their applications, it is crucial in many modern applications to…

A new design for an open-hardware Digital-to-Analog Converter System-on-Module is presented for low-noise ion-trap electrode control. The design specifications were established to fill the technical needs of a modular, scalable DC electrode…

OCDMA systems can support multiple classes of service by differentiating code parameters, power level and diversity order. In this paper, we analyze BER performance of a multi-class 1D/2D OCDMA system and propose a new approximation method…

This letter presents the design and implementation of a compact high-efficiency octave microwave rectifier. A key highlight is the novel segmented impedance matching method, a unique approach that expands the rectifier bandwidth. The diode…

A wide-band current preamplifier based on a composite operational amplifier is proposed. It has been shown that the bandwidth of the preamplifier can be significantly increased by enhancing the effective open-loop gain of the composite…

Gotthard-II is a silicon microstrip detector developed for the European X-ray Free-Electron Laser (XFEL.EU). Its potential scientific applications include X-ray absorption/emission spectroscopy, hard X-ray high resolution single-shot…

The true-differential superconductor on-chip amplifier has complementary outputs that float with respect to chip ground. This improves signal integrity and compatibility with the receiving semiconductor stage. Both source-terminated and…

The design and measurement results of ultra-low power, fast 10-bit Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) prototypes in 65 nm CMOS technology are presented. Eight prototype ADCs were designed using two…

Next generation wireless communication technology long term evolution (LTE) has implemented orthogonal frequency division multiplexing (OFDM) technique as a strong candidate for radio access systems. It has several attributes such as…

Analog to digital converters (ADCs) are a major contributor to the power consumption of multiple-input multiple-output (MIMO) receivers in large bandwidth millimeter-wave systems. Prior works have considered two mitigating solutions to…

A single channel 1.5GS/s 8-bit pipelined-SAR ADC utilizes a novel output level shifting (OLS) settling technique to reduce the power and enable low-voltage operation of the dynamic residue amplifier. The ADC consists of a 4-bit first stage…

This is a review paper updated from that presented for CAS 2004. Essentially, since then, commercial components have continued to extend their performance boundaries but the basic building blocks and the techniques for choosing the best…

In this study, a novel type of Fourier transform radio spectrometer (termed as all-digital radio spectrometer; ADRS) has been developed in which all functionalities comprising a radio spectrometer including a sampler and Fourier computing…

A new method for implementing the kinetic energy operator for real-space, grid-based electronic structure codes is developed. It is based on multi-order Adaptive Finite Differencing (AFD) and uses atomic pseudo orbitals produced by the…

An adaptive operation strategy for on-demand control of active direct methanol fuel cells (DMFCs) is proposed as an alternative method to enhance the voltage stability. A simplified semi-empirical model is firstly developed to describe I-V…

Approximate computing is emerging as an alternative to accurate computing due to its potential for realizing digital circuits and systems with low power dissipation, less critical path delay, and less area occupancy for an acceptable…