相关论文: A 3.5 GS/s 1-1 MASH VCO ADC With Second-Order Nois…

One of the limitations of conventional VCO-ADCs is the restriction to first-order noise shaping. True-VCO architectures have been proposed to increase the noise-shaping order by cascading several VCO integrators, but without requiring…

This paper presents a 17 bit analogue-to-digital converter that incorporates mismatch and quantisation noise-shaping techniques into an energy-saving 10 bit successive approximation quantiser to increase the dynamic range by another 42 dB.…

The design and measurement results of ultra-low power, fast 10-bit Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) prototypes in 65 nm CMOS technology are presented. Eight prototype ADCs were designed using two…

The purpose of this project was to design and implement a pipeline Analog-to-Digital Converter using 0.35um CMOS technology. Initial requirements of a 25-MHz conversion rate and 8-bits of resolution where the only given ones. Although…

This paper presents a low-power 10-bit 130-MS/s successive approximation register (SAR) analog-to-digital converter (ADC) in 90 nm CMOS process. The proposed asynchronous ADC consists of a comparator, SAR logic block and two control blocks…

This paper presents a fully integrated second-order level-crossing sampling data converter for real-time data compression and feature extraction. Compared with level-sampling ADCs which sample at fixed voltage levels, the proposed circuits…

A 6bit flash-ADC with 1.2GSps, wide analog bandwidth and low power, realized in a standard digital 0.13 $\mu$m CMOS copper technology is presented. Employing capacitive interpolation gives various advantages when designing for low power: no…

This paper presents a differential 10-bit 2 MS/s successive approximation register (SAR) analog-to-digital converter (ADC) with a precision-improvement technique. The proposed method breaks the direct tradeoff between the capacitive…

The ubiquitous use of sensing and signal processing is increasing exponentially with the advance of the Internet of Everything (IoE). In this context, the design of every time more power efficient sensor nodes is a must. Within these nodes,…

We present the design and performance of a prototype ASIC digitizer for integrated wire chamber readout, implemented in 65 nm commercial CMOS technology. Each channel of the 4-channel prototype is composed of two 16-bit Time-to-Digital…

A single channel 1.5GS/s 8-bit pipelined-SAR ADC utilizes a novel output level shifting (OLS) settling technique to reduce the power and enable low-voltage operation of the dynamic residue amplifier. The ADC consists of a 4-bit first stage…

With the advancement in the field of the Internet of Things(IoT) and Internet of Bodies(IoB), video camera applications using Video Sensor Nodes(VSNs) have gained importance in the field of autonomous driving, health monitoring, robot…

This paper describes a pipelined analog-to-digital converter (ADC) employing a power and area efficient architecture. The adjacent stages of a pipeline share operational amplifiers. In order to keep accuracy of the amplifiers in the first…

Analog to digital converters (ADCs) are a major contributor to the power consumption of multiple-input multiple-output (MIMO) receivers in large bandwidth millimeter-wave systems. Prior works have considered two mitigating solutions to…

We present the design of a low-power 4-bit 1GS/s folding-flash ADC with a folding factor of two. The design of a new unbalanced double-tail dynamic comparator affords an ultra-low power operation and a high dynamic range. Unlike the…

This paper investigates the design of analog beamforming at the receiver in millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems, aided by full digital chains featuring 1-bit ADCs. We advocate utilizing these full digital…

This paper presents the design and analysis of a wearable CMOS biosensor with three different designs of energy-resolution scalable time-based resistance to digital converters (RDC), targeted towards either minimizing the energy/conversion…

Analog to Digital Converters (ADCs) are a major contributor to the energy consumption on the receiver side of millimeter-wave multiple-input multiple-output (MIMO) systems with large antenna arrays. Consequently, there has been significant…

Low-resolution analog-to-digital converters (ADCs) have emerged as an efficient solution for massive multiple-input multiple-output (MIMO) systems to reap high data rates with reasonable power consumption and hardware complexity. In this…

A 12 bit Pipeline ADC fabricated in a 0.18 $\mu$m pure digital CMOS technology is presented. Its nominal conversion rate is 110MS/s and the nominal supply voltage is 1.8V. The effective number of bits is 10.4 when a 10MHz input signal with…