相关论文: 3D-printed axicon enables extended depth-of-focus …
3D printing allows rapid fabrication of complex objects from digital designs. One 3D-printing process, direct laser writing, polymerises a light-sensitive material by steering a focused laser beam through the shape of the object to be…
We report high efficiency, miniaturized, ultra-fast coherent beam combining with 3D printed micro-optics directly on the tip of a multicore fiber bundle. The highly compact device foot-print (180 micron diameter) facilitates its…
The use of individual multimode optical fibers in endoscopy applications has the potential to provide highly miniaturized and noninvasive probes for microscopy and optical micromanipulation. A few different strategies have been proposed…
Hair-thin optical fiber endoscopes have opened up new paradigms for advanced imaging applications in vivo. In certain applications, such as optical coherence tomography (OCT), light-shaping structures may be required on fiber facets to…
Dermal interstitial fluid (ISF) is a rich source of biomarkers (e.g., glucose) that can be used for continuous health monitoring with wearable sensors. Hollow microneedle devices are a promising solution to extract ISF on demand by…
Photoacoustic microscopy (PAM) is a promising imaging modality because it is able to reveal optical absorption contrast in high resolution on the order of a micrometer. It can be applied in an endoscopic approach by implementing PAM into a…
Additive manufacturing, also known as 3D printing, is an advanced manufacturing technique that allows the fabrication of arbitrary macroscopic and microscopic objects. All 3D printing systems require large optical elements or nozzles in…
Endoscopic optical coherence tomography (OCT) is a valuable tool for providing diagnostic images of internal organs and guiding interventions in real time. Miniaturized OCT endoscopes are essential for imaging small and convoluted luminal…
Mass production of photonic integrated circuits requires high-throughput wafer-level testing. We demonstrate that optical probes equipped with 3D-printed elements allow for efficient coupling of light to etched facets of nanophotonic…
Fiber-form optics extends the high-resolution tomographic imaging capabilities of Optical Coherence Tomography (OCT) to the inside of the human body, i.e., endoscopic OCT. However, it still faces challenges due to the trade-off between…
Multimodal nonlinear endoscopes have been a topic of intense research over the past two decades, enabling sub-cellular and label-free imaging in areas not reachable with table-top microscopes. They are sophisticated systems that can be…
We demonstrate in vivo endoscopic optical coherence tomography (OCT) imaging in the forward direction using a flexible fiber bundle. In comparison to current conventional forward looking probe schemes, our approach simplifies the endoscope…
Flexible fiber-optic endoscopes provide a minimally-invasive solution for imaging at depths beyond the reach of conventional microscopes. Current endoscopes require focusing and/or scanning mechanisms at the distal end, which limit…
Three-dimensional (3D) nano-printing via two-photon polymerization offers unparalleled design flexibility and precision, thereby enabling rapid prototyping of advanced micro-optical elements and systems, including hybrid achromats,…
Super-resolution microscopy normally requiring complex and cumbersome optics is not applicable for in situ imaging through a narrow channel. Here, we demonstrate single hair-thin multimode fiber (MMF) endoscope (less than 250 ${\mu}m$) for…
Photoacoustic (PA) endoscopy has shown significant potential for clinical diagnosis and surgical guidance. Multimode fibres (MMFs) are becoming increasing attractive for the development of miniature endoscopy probes owing to ultrathin size,…
The scanning fiber endoscope (SFE), an ultra-small optical imaging device with a large field-of-view (FOV) for having a clear forward view into the interior of blood vessels, has great potential in the cardio-vascular disease diagnosis and…
This article presents the design and assembly of a novel magnetically actuated endoscopic laser scanner device. The device is designed to perform 2D position control and high speed scanning of a fiber-based laser for operation in narrow…
We have used an inexpensive 3D printer mounting an inexpensive pre-irradiated silicon diode to measure the 2D dose distribution of a small (approximately 10mm FWHM) proton beam. z was measured with high resolution whereas x was changed on a…
We demonstrate the fabrication of millimeter-sized optical components using tomographic volumetric additive manufacturing (VAM). By purposely blurring the writing beams through the use of a large etendue source, the layer-like artifacts…