相关论文: Model Reference Control for Wind Turbine Systems i…
This paper presents a coherent design of wind turbine controllers with explicit consideration of transitions between operating regions by fuzzy membership functions. In improving the design process of wind turbines, the transitions between…
This note proposes a new type of Parallel Distributed Controller (PDC) for Takagi-Sugeno (TS) fuzzy models. Our idea consists of using two control terms based on state feedback, one composed of a convex combination of linear gains weighted…
Robotic manipulators are widely used in applications that require fast and precise motion. Such devices, however, are prompt to nonlinear control issues due to the flexibility in joints and the friction in the motors within the dynamics of…
Wind turbine (WT) controllers are often geared towards maximum power extraction, while suitable operating constraints should be guaranteed such that WT components are protected from failures. Control strategies can be also devised to reduce…
In this paper, the model predictive control (MPC) problem is investigated for the constrained discrete-time Takagi-Sugeno fuzzy Markovian jump systems (FMJSs) under imperfect premise matching rules. To strike a balance between initial…
In this paper, the highly acknowledged advantages of the Model Predictive Control (MPC) approach are utilized to regulate the wind turbines' output power in the partial load region. In this region, the purpose of the designed controller is…
Based on a reduced-order, dynamic nonlinear wind turbine model in Takagi-Sugeno (TS) model structure, a TS state observer is designed as a disturbance observer to estimate the unknown effective wind speed. The TS observer model is an exact…
Model predictive control (MPC) is a powerful control technique for online optimization using system model-based predictions over a finite time horizon. However, the computational cost MPC requires can be prohibitive in resource-constrained…
This paper presents a sensor-less maximum power tracking (MPT) pitch controller for grid connected Wind Turbine (WT). The main advantage of the proposed architecture is that the approach ensures smooth operation and thus minimizes the…
Appropriate control contributes essentially in the design of efficient DC-DC converters. With this intention, a study deals with the synthesis of a controller for DC-DC Three-level Boost converter (TLBC), has been addressed. The studied…
With the rapid growth of wind power penetration, wind farms (WFs) are required to implement frequency regulation that active power control to track a given power reference. Due to the wake interaction of the wind turbines (WTs), there is…
In this manuscript, decentralized robust interval type-2 fuzzy model predictive control for Takagi-Sugeno large-scale systems is studied. The mentioned large-scale system consists a number of interval type-2 (IT2) fuzzy Takagi-Sugeno (T-S)…
This paper proposes a capacitor voltage synchronizing control (CVSC) system for the regulation of full-scale wind power generator-supplied power systems (FWPS). The capacitor combined with the inverter of a full-scale wind power generator…
In this paper, the Model Predictive Control (MPC) and Moving Horizon Estimator (MHE) strategies using a data-driven approach to learn a Takagi-Sugeno (TS) representation of the vehicle dynamics are proposed to solve autonomous driving…
This chapter provides an introduction to the modeling and control of power generation from wind turbine systems. In modeling, the focus is on the electrical components: electrical machine (e.g. permanent-magnet synchronous generators),…
Motivated by the increasing concerns over environmental challenges such as global warming and the exhaustion of fossil-fuel reserves, the renewable energy industry has become the most demanded electrical energy production source worldwide.…
A model predictive control (MPC) scheme for a permanent-magnet synchronous motor (PMSM) is presented. The torque controller optimizes a quadratic cost consisting of control error and machine losses repeatedly, accounting the voltage and…
The current paper presents a Sliding Mode Controller (SMC) for indirect field-oriented Cascaded Doubly Fed Induction Generator (CDFIG) powered through a Matrix Converter (MC). The proposed SMC employs a continuous control strategy to…
The current trend in the evolution of wind turbines is to increase their rotor size in order to capture more power. This leads to taller, slender and more flexible towers, which thus experience higher dynamical loads due to the turbine…
Modern power systems present low levels of inertia due to the growing shares of converter-interfaced generation. Consequently, renewable energy sources are increasingly requested to provide frequency support. In addition, due to the inertia…