相关论文: Adjoint-based optimal actuation for separated flow…

In the current work we numerically study the effect of traveling-wave surface morphing actuation on the suction surface of NACA0012 at Re = 1,000. Although this actuation strategy has been studied at higher Reynolds numbers for an airfoil…

We train active neural-network flow controllers using a deep learning PDE augmentation method to optimize lift-to-drag ratios in turbulent airfoil flows at Reynolds number $5\times10^4$ and Mach number 0.4. Direct numerical simulation and…

We combine three-dimensional (3D) large-eddy simulations (LES) and resolvent analysis to design active separation control techniques on a NACA 0012 airfoil. Spanwise-periodic flows over the airfoil at a chord-based Reynolds number of…

We present a systematic approach for determining the optimal actuator location for separation control from input-output response data, gathered from numerical simulations or physical experiments. The Eigensystem Realization Algorithm is…

A novel adjoint-based framework oriented to optimal flow control in compressible direct numerical simulations is presented. Also, a new formulation of the adjoint characteristic boundary conditions is introduced, which enhances the…

In this study, we find the optimal control boundary (i.e., actuator velocity) that cancels the acoustic reverberations inside drop-on-demand inkjet printheads at a specific time. We formulate an optimization problem to minimize the total…

An adjoint-based optimization is applied to study the thrust performance of a pitching-rolling ellipsoidal plate in a uniform stream at Reynolds number 100. To achieve the highest thrust, the optimal kinematics of pitching-rolling motion is…

We carried out high-resolution large-eddy simulations (LESs) to investigate the effects of several separation-control approaches on a NACA4412 wing section with spanwise width of $L_z = 0.6$ at an angle of attack of $AoA=11^{\circ}$ at a…

We investigate the feasibility of gradient-free aeroacoustic shape optimization using the Flux Reconstruction (FR) approach to study two-dimensional flow at low Reynolds numbers. The Overall Sound Pressure Level (OASPL) is computed via the…

Aerodynamic design optimization is an important problem in aircraft design that depends on the interplay between a numerical optimizer and a high-fidelity flow physics solver. Derivative-based, first and (quasi) second order, optimization…

The flows around a NACA 0018 airfoil at a Reynolds number of 10250 and angles of attack of alpha = 0 (A0) and alpha = 10 (A10) are modelled using resolvent analysis and limited experimental measurements obtained from particle image…

The application of drag-control strategies on canonical wall-bounded turbulence, such as periodic channel and zero- or adverse-pressure-gradient boundary layers, raises the question of how to describe control effects consistently for…

The paper presents a high Reynolds number experimental study of turbulent boundary layer separation control on a convex plate using the wavy-wall method, which was initially proposed for a flat plate by Dr\'o\.zd\.z et al. 2021 (Exp Therm…

The aim of this study is to discover new active-flow-control (AFC) techniques for separation mitigation in a two-dimensional NACA 0012 airfoil at a Reynolds number of 3000. To find these AFC strategies, a framework consisting of a…

Direct numerical simulations (DNS) and modal analysis techniques are applied to investigate the flow over a NACA-0012 airfoil at a Reynolds number of 50,000. Three different sweep angles are considered, namely 0, 20 and 40 degrees, for two…

This research examines the aerodynamic performance of wavy (corrugated) airfoils, focusing specifically on analyzing the impact of two angles of attack: the airfoil's angle of attack and the tail's angle of attack (beta). Simulations were…

Morphing wings comprised of fixed leading sections with piezocomposite trailing control surfaces have emerged as a novel active control technique for unmanned aerial vehicles. However, the wake dynamics and aerodynamic performance of such…

High-fidelity simulations are performed to study active flow control techniques for alleviating deep dynamic stall of a SD7003 airfoil in plunging motion. The flow Reynolds number is $Re=60{,}000$ and the freestream Mach number is $M=0.1$.…

This study explores the use of deep reinforcement learning (DRL) for active flow control (AFC) to reduce flow separation on wings at high angles of attack. Concretely, here the DRL agent controls the flow over the three-dimensional NACA0012…

Flow control for turbulent skin-friction drag reduction is applied to a transonic airfoil to improve its aerodynamic performance. The study is based on direct numerical simulations (with up to 1.8 billions cells) of the compressible…