相关论文: Coded Backscattering Communication with LTE Pilots…

Backscatter radio is a promising technology for low-cost and low-power Internet-of-Things (IoT) networks. The conventional monostatic backscatter radio is constrained by its limited communication range, which restricts its utility in…

Reliably transmitting messages despite information loss due to a noisy channel is a core problem of information theory. One of the most important aspects of real world communication, e.g. via wifi, is that it may happen at varying levels of…

Bluetooth Low Energy (BLE) backscatter is a promising candidate for battery-free Internet of Things (IoT) applications. Unlike existing commodity-level BLE backscatter systems that only enable one-shot communication through BLE advertising…

Considering the exponential growth of Internet-of-Things devices and the goals toward sustainable networks, the complexity should be focused on the infrastructure side. For a massive number of passive devices, backscatter communication (BC)…

The advance of technology for transmitting Data-over-Sound in various IoT and telecommunication applications has led to the concept of machine-to-machine over-the-air acoustic signalling. Reverberation can have a detrimental effect on such…

Recently, the paradigm of massive ultra-reliable low-latency IoT communications (URLLC-IoT) has gained growing interest. Reliable delay-critical uplink transmission in IoT is a challenging task since low-complex devices typically do not…

This paper studies the performance of backscatter communications (BC) over emerging fluid antenna (FA) technology. In particular, a single-antenna source sends information to a FA reader through the wireless forward (i.e., source-to-tag)…

In the near future, the Internet of Things will interconnect billions of devices, forming a vast network where users sporadically transmit short messages through multi-path wireless channels. These channels are characterized by the…

Backscatter communication (BSC) is a promising solution for Internet-of-Things (IoT) connections due to its low-complexity, low-cost, and energy-efficient solution for sensors. There are several network infrastructure setups that can be…

In this paper, a recently conducted measurement campaign for unmanned-aerial-vehicle (UAV) channels is introduced. The downlink signals of an in-service long-time-evolution (LTE) network which is deployed in a suburban scenario were…

Federated edge learning (FEEL) enables wireless devices to collaboratively train a centralised model without sharing raw data, but repeated uplink transmission of model updates makes communication the dominant bottleneck. Over-the-air (OTA)…

The probability density function (pdf) of the received signal of an ambient backscatter communication system is derived, assuming that on-off keying (OOK) is performed at the tag, and that the ambient radio frequency (RF) signal is white…

We propose and practically demonstrate a joint detection and decoding scheme for short-packet wireless communications in scenarios that require to first detect the presence of a message before actually decoding it. For this, we extend the…

Frequency reuse in cells is one of the strategies that LTE uses to maximize the spectrum efficiency. However, it leads to an interference among the cells, especially at the cell edges where the probability for a cell-edge user to be…

We propose a new class of information-coupled (IC) Turbo codes to improve the transport block (TB) error rate performance for long-term evolution (LTE) systems, while keeping the hybrid automatic repeat request protocol and the Turbo…

Communication has been known to be one of the primary bottlenecks of federated learning (FL), and yet existing studies have not addressed the efficient communication design, particularly in wireless FL where both uplink and downlink…

This paper presents a framework for target detection and downlink data transmission in a repeater-assisted bi-static integrated sensing and communication system. A repeater is an active scatterer that retransmits incoming signals with a…

The millimeter-wave bands have been attracting significant interest as a means to achieve major improvements in data rates and network efficiencies. One significant limitation for use of the millimeter-wave bands for cellular communication…

Orthogonal Frequency Division Multiplexing (OFDM) has gained a lot of popularity over the years. Due to its popularity, OFDM has been adopted as a standard in cellular technology and Wireless Local Area Network (WLAN) communication systems.…

One of the key technologies for future IoT/M2M systems are low power wide area networks, which are designed to support a massive number of low-end devices often in the unlicensed shared spectrum using random access protocols. However these…