相关论文: Near-Field Localization with $1$-bit Quantized Hyb…

This paper considers signal detection in massive multiple-input multiple-output (MIMO) systems with general additive hardware impairments and one-bit quantization. First, we present the quantization-unaware and Bussgang decomposition-based…

For 5G it will be important to leverage the available millimeter wave spectrum. To achieve an approximately omni- directional coverage with a similar effective antenna aperture compared to state of the art cellular systems, an antenna array…

Dynamic metasurface antennas (DMA) provide low-power beamforming through reconfigurable radiative slots. Each slot has a tunable component that consumes low power compared to typical analog components like phase shifters. This makes DMAs a…

This paper addresses the problem of uplink transmit power optimization in distributed massive multiple-input multiple-output systems, where remote radio heads (RRHs) are equipped with 1-bit analog-to-digital converters (ADCs). First, in a…

The quasi-optical propagation of millimeter-wave signals enables high-accuracy localization algorithms that employ geometric approaches or machine learning models. However, most algorithms require information on the indoor environment, may…

Accurate channel estimation is essential for reliable communication in sub-THz extremely large (XL) MIMO systems. Deploying XL-MIMO in high-frequency bands not only increases the number of antennas, but also fundamentally alters channel…

Enabling communications in the (sub-)THz band will call for massive multiple-input multiple-output (MIMO) arrays at either the transmit- or receive-side, or at both. To scale down the complexity and power consumption when operating across…

Hybrid Analog and Digital (HAD) architectures provide a cost-effective alternative for large-scale antenna arrays, but accurate Direction-of-Arrival (DoA) estimation remains challenging due to limited digital dimensionality and constrained…

The combination of orthogonal frequency modulation (OFDM) and multiple-input multiple-output (MIMO) systems plays an important role in modern communication systems. In order to meet the growing throughput demands, future MIMO-OFDM receivers…

One-bit analog-to-digital converter (ADC), performing signal sampling as an extreme simple comparator, is an overwhelming technology for spectrum sensing due to its low-cost, low-power consumptions and high sampling rate. In this letter, we…

One of the main drawbacks of the well-known Direct Position Determination (DPD) method is the requirement that raw signal data be transferred to a common processor. It would therefore be of high practical value if DPD$-$or a modified…

In the next generation of wireless systems, Massive MIMO offers high angular resolution for localization. By virtue of large number of antennas, the Angle of Arrival (AoA) of User Terminals (UTs) can be estimated with high accuracy.…

A low-cost, stand-alone Global-Positioning-System-time-synchronized data acquisition system is described. The constructed prototype allows recoding up to four analog signals with a 16-bit resolution in variable ranges and a maximum sampling…

This paper considers the problem of ground user localization based on received signal strength (RSS) measurements obtained by an unmanned aerial vehicle (UAV). We treat UAV-user link channel model parameters and antenna radiation pattern of…

We investigate the information-theoretic throughout achievable on a fading communication link when the receiver is equipped with one-bit analog-to-digital converters (ADCs). The analysis is conducted for the setting where neither the…

Hybrid analog-digital precoding is challenging for broadband millimeter-wave (mmWave) massive MIMO systems, since the analog precoder is frequency-flat but the mmWave channels are frequency-selective. In this paper, we propose a principal…

Extremely large antenna array (ELAA) not only effectively enhances system communication performance but also improves the sensing capabilities of communication systems, making it one of the key enabling technologies in 6G wireless networks.…

The paper discusses the increasing use of hybridized sensor information for GNSS-based localization and navigation, including the use of 3D map-aided GNSS positioning and terrestrial systems based on different geometric measurement…

Localization is a key feature of future Sixth Generation (6G) net-works with foreseen accuracy requirements down to the millimeter level, to enable novel applications in the fields of telesurgery, high-precision manufacturing, and others.…

Movable antenna (MA) introduces a new degree of freedom for future wireless communication systems by enabling the adaptive adjustment of antenna positions. Its large-range movement renders wireless channels transmission into the near-field…