相关论文: Rethinking Ductility -- A Study Into the Size-Affe…
Brittle materials exhibit sharp dynamical fractures when meeting Griffith's criterion, whereas ductile materials blunt a sharp crack by plastic responses. Upon continuous pulling ductile materials exhibit a necking instability which is…
We analyze the failure process of a two-component system with widely different fracture strength in the framework of a fiber bundle model with localized load sharing. A fraction 0\leq \alpha \leq 1 of the bundle is strong and it is…
Brittle-ductile transition (BDT) is an important characteristic of amorphous (and semicrystalline) polymers. For a given strain rate, at temperatures above BDT, the polymers exhibit strain softening followed by yield and strain hardening,…
Refractory body-centered cubic (BCC) metals and alloys are of extraordinary importance in modern technological and structural applications. However, their wider adoption in science and technology is severely restricted by low-temperature…
Fatigue fracture in ductile materials, e. g. metals, is caused by cyclic plasticity. Especially regarding the high numbers of load cycles, plastic material models resolving the full loading path are computationally very demanding. Herein, a…
Neutron irradiation in structural alloys promotes defect clustering, which suppresses plasticity and triggers a ductile-to-brittle transition (DBT), a key degradation mechanism limiting fracture resistance in nuclear materials. This study…
The toughness of a polymer material can increase significantly if two networks are combined into one material. This toughening effect is a consequence of a transition from a brittle to a ductile failure response. Although this transition…
Multi-phase materials are key for modern engineering applications. They are generally characterized by a high strength and ductility. Many of these materials fail by ductile fracture of the, generally softer, matrix phase. In this work we…
The conditions which determine whether a material behaves in a brittle or ductile fashion on mechanical loading are still elusive and comprise a topic of active research among materials physicists and engineers. In this study, we present…
The fracture behavior of brittle and ductile materials can be strongly influenced by thermal fluctuations, especially in micro- and nano-devices as well as in rubberlike and biological materials. However, temperature effects, in particular…
As a potential building block for the next generation of devices or multifunctional materials that are spreading almost every technology sector, one-dimensional (1D) carbon nanomaterial has received intensive research interests. Recently, a…
We introduce a lattice model able to describe damage and yielding in heterogeneous materials ranging from brittle to ductile ones. Ductile fracture surfaces, obtained when the system breaks once the strain is completely localized, are shown…
This study investigates the mode I intra-laminar fracture and size effect in Discontinuous Fiber Composites (DFCs). Towards this goal, the results of fracture tests on geometrically-scaled Single Edge Notch Tension (SENT) specimens are…
When considering grinding of minerals, scaling effect induces competition between plastic deformation and fracture in brittle solids. The competition can be sketched by a critical size of the material, which characterizes the…
The mechanical behaviour of many materials, including polymers or natural materials, significantly depends on the rate of deformation. As a consequence, a rate-dependent ductile-to-brittle fracture transition may be observed. For…
Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for…
Quasi-brittle behavior where macroscopic failure is preceded by stable damaging and intensive cracking activity is a desired feature of materials because it makes fracture predictable. Based on a fiber bundle model with global load sharing…
Recent computational and laboratory experiments have shown that the brittle-ductile transitions in metallic glasses such as Vitreloy1 are strongly sensitive to the initial effective disorder (or "fictive") temperature. Glasses with lower…
Understanding the fracture toughness of glasses is of prime importance for science and technology. We study it here using extensive atomistic simulations in which the interaction potential, glass transition cooling rate and loading geometry…
High-density polyethylene (HDPE) thin films, while inherently ductile, exhibit poor flaw tolerance. Our experiments show that they fail prematurely not at the point of maximum stretch, but at the boundary of a necked region or notch-tip…