相关论文: Harmonic control of three-phase AC/DC converter

This paper introduces a continuous-time constrained nonlinear control scheme which implements a model predictive control strategy as a continuous-time dynamic system. The approach is based on the idea that the solution of the optimal…

Grid-connected inverter control is challenging to implement due to the difficulty of obtaining and maintaining an accurate grid model. Direct Data-Driven Predictive Control provides a model-free alternative to traditional model-based…

This article is the second part of a paper series about interference in extremum (i.e., peak or valley) current-mode control, which applies to both fixed and variable switching frequency power converters. Specifically, this part presents…

We consider the task of motion control for non-prehensile manipulation using parallel kinematics mechatronic setup, in particular, stabilization of a ball on a plate under unmeasured external harmonic disturbances. System parameters are…

This paper proposes a prescribed performance function aware hybrid gain finite time sliding mode control framework for a class of nonlinear systems subject to matched disturbances. The hybrid gain structure ensures bounded control effort…

This paper addresses the distributed frequency control problem in a multi-area power system taking into account of unknown time-varying power imbalance. Particularly, fast controllable loads are utilized to restore system frequency under…

This paper considers the optimal control for hybrid systems whose trajectories transition between distinct subsystems when state-dependent constraints are satisfied. Though this class of systems is useful while modeling a variety of…

In this paper we present a direct adaptive control method for a class of uncertain nonlinear systems with a time-varying structure. We view the nonlinear systems as composed of a finite number of ``pieces,'' which are interpolated by…

In this paper, the finite-time control and bumpless transfer control are investigated for switched systems under asynchronously switching. First, a class of dynamic output feedback controllers are designed to stabilize the switched system…

In multi-infeed hybrid AC-DC (MIDC) systems, the asynchronous interconnection between regional grids, the complicated system dynamics and possible cascading failures have an enormous effect on the frequency stability. In order to deal with…

To reduce CO2 emissions and tackle increasing fuel costs, the aviation industry is swiftly moving towards the electrification of aircraft. From the viewpoint of systems and control, a key challenge brought by this transition corresponds to…

This paper presents a new model-based algorithm that computes predictive optimal controls on-line and in closed loop for traditionally challenging nonlinear systems. Examples demonstrate the same algorithm controlling hybrid impulsive,…

Transients of a grid-synchronized voltage source converter (VSC) are closely related to over- currents and voltages occurred under large disturbances (e.g. a grid fault). Previous analysis in evaluating these transients usually neglect the…

This work presents a cascaded hybrid control framework for quadrotor trajectory tracking under nonlinear dynamics and external disturbances. In quadrotor systems, the altitude and attitude channels exhibit fast, structured dynamics that are…

This paper presents a novel approach to including non-instantaneous discrete control transitions in the linear hybrid automaton approach to simulation and verification of hybrid control systems. In this paper we study the control of a…

Grid-connected inverters are required to operate stably under a wide range of grid conditions. However, conventional grid-following (GFL) control may suffer from instability under weak-grid conditions, while grid-forming (GFM) control may…

Conventional grid-code specifications for dynamic ancillary services provision such as fast frequency and voltage regulation are typically defined by means of piece-wise linear step-response capability curves in the time domain. However,…

Pipelined analog-to-digital converters (ADCs) are fundamental components of various signal processing systems requiring high sampling rates and a high linearity. Over the past years, calibration techniques have been intensively investigated…

In this work, we introduce a new three-dimensional chaotic differential dynamical system. We find equilibrium points of this system and provide the stability conditions for various fractional orders. Numerical simulations will be used to…

The mathematical modeling of open-switch faults in two-level machine-side converters and the fault-tolerant current control of isotropic permanent-magnet synchronous generators are discussed. The proposed converter model is generic for any…