相关论文: Atomic Layer Deposited Protective Coating of Alumi…
Silver is a metal which provides the highest reflectivity in the very broad wavelength range as well as the lowest polarization splitting. However, it is not very stable chemically and silver mirrors are easily damaged in a corrosive or…
Silver (Ag) mirrors for astronomical telescopes consist of multiple metallic and dielectric thin films. Furthermore, the topmost surface of such Ag mirrors needs to be covered by a protection coating. While the protection coating is often…
Protection of silver mirror stacks from environmental degradation before launching is crucial for space applications. Hereby, we report a comparative study of the advanced protection of silver mirror stacks for space telescopes provided by…
We report on the development and application of an atomic layer etching (ALE) procedure based on alternating exposures of trimethylaluminum and anhydrous hydrogen fluoride (HF) implemented to controllably etch aluminum oxide. Our ALE…
Extending plasmonics into the ultraviolet range imposes the use of aluminum to achieve the best optical performance. However, water corrosion is a major limiting issue for UV aluminum plasmonics, as this phenomenon occurs significantly…
Atomic layer deposition (ALD) provides uniform and conformal thin films that are of interest for a range of applications. To better understand the properties of amorphous ALD films, we need improved understanding of their local atomic…
Tritium permeation into and through materials poses a critical challenge for the development of nuclear fusion reactors. Minimizing tritium permeation is essential for the safe and efficient use of available fuel supplies. In this work, we…
Upgrades to ground-based gravitational-wave observatories will require mirror coatings with reduced thermal noise, enabling improved detector sensitivity and extended astrophysical reach. Recent studies have shown that optical coatings…
In this paper we demonstrated the thermal Atomic Layer Deposition (ALD) growth at 250 {\deg}C of highly homogeneous and ultra-thin ($\approx$ 3.6 nm) $Al_2O_3$ films with excellent insulating properties directly onto a monolayer (1L)…
Tandem solar cells offer a promising alternative to exceed the efficiency limits of single-junction silicon photovoltaics, yet they require high-performance recombination junctions that are transparent, passivating, and electrically…
Recent advances in the physical vapor deposition (PVD) of protective fluoride films have raised the far-ultraviolet (FUV: 912-1600 {\AA}) reflectivity of aluminum-based mirrors closer to the theoretical limit. The greatest gains, at more…
The structural and nanochemical properties of thin $AlO_x$ layers are decisive for the performance of advanced electronic devices. For example, they are frequently used as tunnel barriers in Josephson junction-based superconducting devices.…
Next-generation heat-assisted magnetic recording (HAMR) relies on fast, localized heating of the magnetic medium during the write process. Au plasmonic near-field transducers are an attractive solution to this challenge, but increased…
The global pandemic has significantly increased the demand for personal protective equipment (PPE). The antimicrobial coating has been broadly applied to PPE to improve its prevention capability, especially after prolonged usage. However,…
We report the impact of capping layers on vanadate based transparent conductive oxides (TCOs) to prolong the thermal stability with a minimal loss of resistivity during heat treatment in ambient environment. In the present study, various…
Thin aluminum oxide films were deposited by a new and simple physicochemical method called chemical liquid phase deposition (CLD) on semiconductor materials. Aluminum sulfate with crystallized water and sodium bicarbonate were used as…
In recent years, tremendous progress has been made on complementary metal-oxide-semiconductor (CMOS) sensors for applications as X-ray detectors. To shield the visible light in X-ray detection, a blocking filter of aluminum is commonly…
We report on an extensive structural and electrical characterization of under-gate dielectric oxide insulators Al2O3 and HfO2 grown by Atomic Layer Deposition (ALD). We elaborate the ALD growth window for these oxides, finding that the…
In our previous publication, we discussed the optical properties of multi-layered nanocomposite samples consisting of 300 pairs of an AlOx layer and a Cu layer produced from sputtering atomic layer augmented deposition (SALAD). These…
$Al/AlO_x/Al$-layer systems are frequently used for Josephson junction-based superconducting devices. Although much work has been devoted to the optimization of the superconducting properties of these devices, systematic studies on…