相关论文: Computational study of III-V direct-gap semiconduc…
Thermophotovoltaic (TPV) cells are increasingly attractive for applications in industrial waste heat harvesting, aerospace energy management, and compact power generation. Deploying midwave-infrared (MWIR) TPV in practical applications…
Tuning the bandgap in ternary III-V semiconductors via modification of the composition or the strain in the material is a major approach for the design of optoelectronic materials. Experimental approaches screening a large range of possible…
A p-n junction maintained at above ambient temperature can work as a heat engine, converting some of the supplied heat into electricity and rejecting entropy by interband emission. Such thermoradiative cells have potential to harvest…
We report the fabrication and measurement of thermophotovoltaic (TPV) cells with efficiencies of >40%, which is a record high TPV efficiency and the first experimental demonstration of the efficiency of high-bandgap tandem TPV cells. TPV…
Compound semiconductors have been the predominant building blocks for the current mid-infrared thermophotovoltaic devices relevant to sub-2000 K heat conversion and power beaming. However, the prohibitively high cost associated with these…
We present inverted metamorphic Ga0.3In0.7As photovoltaic converters with sub-0.60 eV bandgaps grown on InP and GaAs substrates. The compositionally graded buffers in these devices have threading dislocation densities of 1.3x10^6 cm^-2 and…
The performance of a near-field thermophotovoltaic system with a tandem-cell structure composed of thin-film p-doped GaSb and n-doped InAs sub-cells on a gold backside reflector is theoretically investigated. The temperatures of the…
Tandem solar cells can better harness the energy of the solar spectrum. Chalcopyrite solar cells have drawn attention, being the only highly efficient devices with bandgap around 1.0 eV, suitable for bottom cells. In the quest for better…
Significant progress has been made in the field of thermophotovoltaics, with efficiency recently rising to over 40% due to improvements in cell design and material quality, higher emitter temperatures, and better spectral management.…
Harnessing low energy photons is of paramount importance for multi-junction high efficiency solar cells as well as for thermo-photovoltaic applications. However, semiconductor absorbers with bandgap lower than 0.8 eV have been limited to…
Nanogap thermophotovoltaic (TPV) devices can deliver high power densities even with the medium-temperature heat sources. As such, these devices are very promising for recovering industrial waste heat. So far, the demonstrated nanogap TPVs…
This work theoretically explores a spectrally selective TPV cell based on an asymmetric Fabry-Perot resonance cavity structure with sub-100-nm GaSb layer. The simulated spectral property of the ultrathin nanophotonic cell structure exhibits…
Here we investigate the use of single-junction InGaAs airbridge cells (ABCs) at elevated power densities. Such conditions are relevant to many thermophotovoltaic (TPV) applications, ranging from space to on-demand renewable electricity, and…
Following the success of p-Ge hot-hole lasers, there is also potential for using other semiconductor materials, notably III-V's such as GaAs and InSb. Previous analysis had suggested that a large effective mass ratio between the heavy and…
Epitaxial growth of III-V semiconductors on Si is a promising route for silicon photonics. Threading dislocations and the residual thermal stress generated during growth are expected to affect the thermal conductivity of the III-V…
Compared to traditional pn-junction photovoltaics, hot carrier solar cells offer potentially higher efficiency by extracting work from the kinetic energy of photogenerated "hot carriers" before they cool to the lattice temperature. Hot…
We report the first empirical efficiency measurement of germanium-based thermophotovoltaic devices under high-temperature, high-irradiance conditions using a high view-factor calorimetric setup. Two TPV cell architectures were fabricated on…
Thermophotovoltaics (TPVs) have the potential to exhibit higher power conversion efficiencies than traditional photovoltaics (PVs), with a broad range of applicability from waste recovery systems to aerospace solutions. They operate by…
Semiconductor emitter can possibly achieve sharp cutoff wavelength due to its intrinsic bandgap absorption and almost zero sub-bandgap emission without doping. A germanium wafer based selective emitter with front-side antireflection and…
It is well known that performance of a thermophotovoltaic (TPV) device can be enhanced if the vacuum gap between the thermal emitter and the TPV cell becomes nanoscale due to the photon tunneling of evanescent waves. Having multiple…