相关论文: Laser Doppler vibrometer and accelerometer for vib…
Non-intrusive displacement measurement technique has a distinct edge over displacement sensors working in contact mode. Laser Doppler Vibrometry based schemes (LDV) offer such an advantage. However, the measurements are limited up to…
Scanning Laser Doppler Vibrometer (SLDV) measurements are affected by sensor head vibrations as if they are vibrations of the target surface itself. This paper presents practical correction schemes to solve this important problem. The study…
Due to the unprecedented increase in telework requirements, the motivation to further automate and remotely control experiments has become apparent. This work documents the technical development of creating a two-dimensional (2D) Laser…
For objects of "large" vibration size such as waves on the sea surface, the choice of measurement method can create different understandings of system behavior. In one case, laser vibrometry measurements of a vibrating bar in a controlled…
We describe a time lens to expand the dynamic range of photon Doppler velocimetry (PDV) systems. The principle and preliminary design of a time-lens PDV (TL-PDV) are explained and shown to be feasible through simulations. In a PDV system,…
Autonomous underwater vehicles (AUVs) are increasingly used in many applications such as oceanographic surveys, mapping, and inspection of underwater structures. To successfully complete those tasks, a Doppler velocity log (DVL) and an…
Photoacoustic imaging has emerged as a powerful, non-invasive modality for various biomedical applications. Conventional photoacoustic systems require contact-based ultrasound detection and expensive and bulky high-power lasers for the…
This paper presents a least mean square (LMS) algorithm for the joint estimation of acoustic and mean flow velocities from laser doppler velocimetry (LDV) measurements. The usual algorithms used for measuring with LDV purely acoustic…
In order to enable investigations of the fuel flow inside unmodified injectors, we have developed a new experimental approach to measure time-resolved vibration spectra of diesel nozzles using a three dimensional laser vibrometer. The…
Vibration measurements have been used to reliably diagnose performance problems in machinery and related mechanical products. A vibration data collector can be used effectively to measure and analyze the machinery vibration content in…
A drift mode accelerometer is a precision device that overcomes the much of the acceleration noise and readout dynamic range limitations of traditional electrostatic accelerometers. It has the potential of achieving acceleration noise…
High accuracy and dynamic range have been some of the most prominent challenges when it comes to fine-scale turbulence measurements. The current commercial LDA processors, which perform the signal processing of Doppler bursts directly using…
The nanometer scale beam sizes at the interaction point in linear colliders limit the allowable motion of the final focus magnets. We have constructed a prototype system to investigate the use of active vibration damping to control magnet…
The demand from industry to produce accurate acceleration measurements down to ever lower frequencies and with ever lower noise is increasing. Different vibration transducers are used today for many different purposes within this area, like…
This paper demonstrates a vibration test for a resonant MEMS scanning system in operation to evaluate the vibration immunity for automotive lidar applications. The MEMS mirror has a reinforcement structure on the backside of the mirror,…
The elastodynamic response of finite 3D phononic structures is analyzed by means of comparing experimental findings obtained through a laser Doppler vibrometry-based methodology and theoretical computations performed with the…
In this paper, we propose a novel non-contact vibration measurement system that is competent in estimating linear and/or rotational motions of machine parts. The technique combines microwave radar, standard camera, and optical strobe to…
This work considers current potential uses of laser Doppler velocimetry. A discussion of other optical velocimetry techniques is presented and compared with their practical application to modern shock physics diagnostics, such as VISAR.
Photonic Doppler Velocimetry (PDV) is an established technique for measuring the velocities of fast-moving surfaces in high-energy-density experiments. In the standard approach to PDV analysis, a short-time Fourier transform (STFT) is used…
Autonomous underwater vehicles (AUVs) are employed for marine applications and can operate in deep underwater environments beyond human reach. A standard solution for the autonomous navigation problem can be obtained by fusing the inertial…