相关论文: Development of a thorium coating on an aluminium s…
Passivating lithium ion battery electrode surfaces to prevent electrolyte decomposition is critical for battery operations. Recent work on conformal atomic layer deposition (ALD) coating of anodes and cathodes has shown significant…
Electrodeposition of tantalum coating was performed from an ionic liquid, BMP[Tf2N], in the presence of dissolved anhydrous TaF5 and LiF. Superficial X-ray photoelectron spectroscopy supplemented by an argon ion etching and depth profiling…
Tritium permeation into and through materials poses a critical challenge for the development of nuclear fusion reactors. Minimizing tritium permeation is essential for the safe and efficient use of available fuel supplies. In this work, we…
Template-assisted synthesis is a facile way of growing various one-dimensional nanostructures. Among various nanoporous templates, anodic aluminium oxide (AAO) is most commonly used. In this work, the kinetics of silver nanowire growth by…
We report the results of experimental studies related to implantation of thorium ions into thin silicon dioxide by pulsed plasma fluxes expansion. Thorium ions were generated by laser ablation from a metal target, and the ionic component of…
Thin aluminum oxide films were deposited by a new and simple physicochemical method called chemical liquid phase deposition (CLD) on semiconductor materials. Aluminum sulfate with crystallized water and sodium bicarbonate were used as…
In this paper we demonstrated the thermal Atomic Layer Deposition (ALD) growth at 250 {\deg}C of highly homogeneous and ultra-thin ($\approx$ 3.6 nm) $Al_2O_3$ films with excellent insulating properties directly onto a monolayer (1L)…
We report the development of broadband solar absorber coatings based on titanium suboxide composite thin films on aluminium substrates. The films are fabricated via scalable DC magnetron sputtering using a Ti target, followed by…
Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at…
A method to treat the surface of Nb is described which potentially can improve the performance of superconducting RF cavities. We present tunneling and x-ray photoemission spectroscopy (XPS) measurements at the surface of cavity-grade…
Composite cathode coatings made of a high energy density layered oxide (Li1.2Ni0.15Mn0.55Co0.1O2, theoretical capacity ~377 mAh/g), polyvinylidene fluoride (PVdF) binder, and electron-conduction additives, were bonded to an elastic…
Highly porous Pt/Al thin film electrodes on yttria stabilized zirconia electrolytes were prepared by dealloying of co-sputtered Pt/Al films. The oxygen reduction capability of the resulting electrodes was analyzed in a solid oxide fuel cell…
Ammonium tetrathiomolybdate (ATM) spontaneously self assembles on Au electrodes forming a hydrophilic, air stable, pH (3-11) tolerant multilayer that is stable over a reasonably large potential window. The ATM functionalized Au electrodes…
In recent years, impressive advances in harvesting renewable energy have led to pressing demand for the complimentary energy storage technology. Here, a high coulombic efficiency (~ 99.7%) Al battery is developed using earth-abundant…
We present a dry surface treatment combining atomic layer etching and deposition (ALE and ALD) to mitigate dielectric loss in fully fabricated superconducting quantum devices formed from aluminum thin films on silicon. The treatment,…
Sodium-ion batteries exhibit significant promise as a viable alternative to current lithium-ion technologies owing to their sustainability, low cost per energy density, reliability, and safety. Despite recent advancements in cathode…
Several active areas of research in novel energy storage technologies, including three-dimensional solid state batteries and passivation coatings for reactive battery electrode components, require conformal solid state electrolytes. We…
A simplified density functional theory (DFT) method for charged adsorbates on an ultrathin, insulating film supported by a metal substrate is developed and presented. This new method is based on a previous DFT development that uses a…
Plasma electrolytic oxidation (PEO) is a process for obtaining oxide coatings on valve metals. Mostly PEO is done in an aqueous solution electrolyte which limits the size of treated parts due to the system heating up. In presented work an…
Silver is a metal which provides the highest reflectivity in the very broad wavelength range as well as the lowest polarization splitting. However, it is not very stable chemically and silver mirrors are easily damaged in a corrosive or…