相关论文: Effect of surface morphology on magnetization dyna…

Evolution of magnetization behaviour of cobalt film on nano patterned silicon substrate, with film thickness, has been studied. In situ magneto-optical Kerr effect measurements during film deposition allowed us to study genuine thickness…

The correlation between magnetic and structural properties of Co_{2} FeAl (CFA) thin films of different thickness (10 nm<d< 100 nm) grown at room temperature on MgO-buffered Si/SiO2 substrates and annealed at 600\lyxmathsym{\textdegree}C…

The thickness evolution of in-plane magnetization reversal in ultrathin films is studied with a theoretical model that takes account of surface roughness typical of epitaxial growth. Guided by N\'{e}el's model, step edge sites of…

We measured geometric and magnetic properties of Co films on the Pd(111) surface by x-ray photoelectron diffraction (XPD), x-ray magnetic circular dichroism (MCD) at the Co L_{2,3} edge, and the surface magneto-optical Kerr effect (SMOKE)…

Co2FeAl (CFA) thin films with thickness varying from 10 nm to 115 nm have been deposited on MgO(001) substrates by magnetron sputtering and then capped by Ta or Cr layer. X-rays diffraction (XRD) revealed that the cubic $[001]$ CFA axis is…

Co /CoO/Co polycrystalline film was grown on Si (001) substrate and magnetic properties have been investigated using in-situ magneto-optic Kerr effect during growth of the sample. Magnetic anisotropy with easy axis perpendicular to the film…

We investigate the correlation between roughness, remanence and coercivity in Co/Ni films grown on Cu seed layers of varying thickness. Increasing the Cu seed layer thickness of Ta/Cu/8x[Co/Ni] thin films increases the roughness of the…

We report an interesting magnetic behavior of a Co film (thickness ~ 350 {\AA}) grown on Si/Ti/Cu buffer layer by electro-deposition (ED) technique. Using depth sensitive X-ray reflectivity and polarized neutron reflectivity (PNR) we…

Growth optimization of multilayers is a topic of interest due to their unique physical properties. Systems containing magnetic materials, such as platinum-cobalt, have been studied because of their potential for technological applications,…

The epitaxial system Sm/Co(0001) was studied for Sm coverages up to 1 monolayer (ML) on top of ultrathin Co/W(110) epitaxial films. Two ordered phases were found for 1/3 and 1 ML Sm, respectively. The valence state of Sm was determined by…

We present room temperature ferromagnetic resonance (FMR) studies of polycrystalline ||Pt/10 nm Cu/t Co/10 nm Cu/Pt|| films as a function of Co layer thickness (1 < t < 10 nm) grown by evaporation and magnetron sputtering. FMR was studied…

Co2MnSi (CMS) films of different thicknesses (20, 50 and 100 nm) were grown by radio frequency (RF) sputtering on a-plane sapphire substrates. Our X-rays diffraction study shows that, in all the samples, the cubic <110> CSM axis is normal…

Anatase Ti0.96Co0.04O2 films were grown epitaxially on SrTiO3 (001) substrates by using plused laser deposition with in-situ reflection high-energy electron diffraction. The oxygen partial pressure, PO2, during the growth was systematically…

The magnetoresistance (MR) of 10 nm to 200 nm thin polycrystalline Co-films, deposited on glass and insulating Si(100), is studied in fields up to 120 kOe, aligned along the three principal directions with respect to the current:…

Thin film deposition on weakly interacting substrates exhibits a unique growth mode characterized by initially strong island formation and rapidly increasing roughness, which reaches a maximum and subsequently decreases as the film returns…

We have studied the magneto-optical spectra of ultrathin magnetic films deposited on Si substrates coated with an oxide layer (SiOx). We find that the Kerr rotation angle and the ellipticity of ~1 nm thick CoFeB thin films, almost…

Using combined magnetometry and ferromagnetic resonance studies, it is shown that introduction of a hydrocarbon cover layer leads to an increase of the contribution of the surface anisotropy to the effective magnetic anisotropy energy of…

The quantum size effect (QSE) and strain effect are two key factors influencing the surface morphology of thin films, which can increase film surface roughness through QSE-induced thickness oscillation and strain-induced island formation,…

Magnetism of 3d transition metals at high density has always received wide interest due to existence of magnetism at the core of the Earth. For ferromagnetic cobalt, although there is a theoretical prediction that its magnetic moment would…

NiCo2O4 (NCO) films grown on MgAl2O4 (001) substrates have been studied using magnetometry, x-ray magnetic circular dichroism (XMCD) based on x-ray absorption spectroscopy, and spin-polarized inverse photoemission spectroscopy (SPIPES) with…