相关论文: A Kriging Metamodel with Adaptive Sampling for Sei…
The authors propose a methodology to perform seismic damage assessment of instrumented wood-frame buildings using response measurements. The proposed methodology employs a nonlinear model-based state observer that combines sparse…
This paper presents a framework for decision-making regarding post-earthquake assessment of instrumented buildings in a manner consistent with performance-based design criteria. This framework is achieved by simultaneously combining and…
The ground structure can substantially influence seismic ground motion underscoring the need to develop a ground structure model with sufficient reliability in terms of ground motion estimation for earthquake damage mitigation. While many…
One of the commonly used seismic force-resisting systems in structures is Reinforced Concrete (RC) Intermediate Moment Frames (IMF). Although using the IMF is not allowed in high seismic hazard zones according to ASCE 7-10, it is permitted…
This paper investigates the nonlinear dynamics of stepping flexible frames under seismic excitation. The conventional iterative method of solution of peak quasi-dynamic displacement of stepping frames is not guaranteed to converge. To…
A methodology for the performance-based seismic risk assessment of classical columns is presented. Despite their apparent instability, classical columns are, in general, earthquake resistant, as proven from the fact that many classical…
In countries with a moderate seismic hazard, the classical methods developed for strong motion prone countries to estimate the seismic behaviour and subsequent vulnerability of existing buildings are often inadequate and not financially…
Structural reliability methods aim at computing the probability of failure of systems with respect to some prescribed performance functions. In modern engineering such functions usually resort to running an expensive-to-evaluate…
During the past two decades, the use of ambient vibrations for modal analysis of structures has increased as compared to the traditional techniques (forced vibrations). The Frequency Domain Decomposition method is nowadays widely used in…
The computational effort for the evaluation of numerical simulations based on e.g. the finite-element method is high. Metamodels can be utilized to create a low-cost alternative. However the number of required samples for the creation of a…
Fragility curves are commonly used in civil engineering to assess the vulnerability of structures to earthquakes. The probability of failure associated with a prescribed criterion (e.g. the maximal inter-storey drift of a building exceeding…
Estimates of seismic wave speeds in the Earth (seismic velocity models) are key input parameters to earthquake simulations for ground motion prediction. Owing to the non-uniqueness of the seismic inverse problem, typically many velocity…
Developing a rapid, but also reliable and efficient, method for classifying the seismic damage potential of buildings constructed in countries with regions of high seismicity is always at the forefront of modern scientific research. Such a…
As an integral part of assessing the seismic performance of structures, the probabilistic seismic demand-intensity relationship has been widely studied. In this study, the phenomenon of heteroscedasticity in probabilistic seismic demand…
Seismic imaging is the numerical process of creating a volumetric representation of the subsurface geological structures from elastic waves recorded at the surface of the Earth. As such, it is widely utilized in the energy and construction…
Seismic assessment of buildings and determination of their structural damage is at the forefront of modern scientific research. Since now, several researchers have proposed a number of procedures, in an attempt to estimate the damage…
Fragility curves are commonly used in civil engineering to estimate the vulnerability of structures to earthquakes. The probability of failure associated with a failure criterion (e.g. the maximal inter-storey drift ratio being greater than…
The detection and rapid characterisation of earthquake parameters such as magnitude are of prime importance in seismology, particularly in applications such as Earthquake Early Warning (EEW). Traditionally, algorithms such as STA/LTA are…
Seismic fragility curves have been introduced as key components of Seismic Probabilistic Risk Assessment studies. They express the probability of failure of mechanical structures conditional to a seismic intensity measure and must take into…
This paper investigates the inelastic response of a yielding structure coupled with a rocking wall which can be vertically restrained. The paper first derives the nonlinear equations of motion of a yielding oscillator coupled with a…