相关论文: Exploring the potential of GeTe for the applicatio…
We report the fabrication and measurement of thermophotovoltaic (TPV) cells with efficiencies of >40%, which is a record high TPV efficiency and the first experimental demonstration of the efficiency of high-bandgap tandem TPV cells. TPV…
We report the first empirical efficiency measurement of germanium-based thermophotovoltaic devices under high-temperature, high-irradiance conditions using a high view-factor calorimetric setup. Two TPV cell architectures were fabricated on…
Semiconductor emitter can possibly achieve sharp cutoff wavelength due to its intrinsic bandgap absorption and almost zero sub-bandgap emission without doping. A germanium wafer based selective emitter with front-side antireflection and…
Tellurium (Te) is an intrinsically p-type doped narrow bandgap semiconductor with excellent electrical conductivity and low thermal conductivity. Bulk trigonal Te has been theoretically predicted and experimentally demonstrated to be an…
It is well known that performance of a thermophotovoltaic (TPV) device can be enhanced if the vacuum gap between the thermal emitter and the TPV cell becomes nanoscale due to the photon tunneling of evanescent waves. Having multiple…
The performance of a combined solar photovoltaic (PV) and thermoelectric generator (TEG) system is examined using an analytical model for four different types of commercial PVs and a commercial bismuth telluride TEG. The TEG is applied…
This work theoretically explores a spectrally selective TPV cell based on an asymmetric Fabry-Perot resonance cavity structure with sub-100-nm GaSb layer. The simulated spectral property of the ultrathin nanophotonic cell structure exhibits…
Recently, near-field radiative heat transfer enhancement across nanometer vacuum gaps has been intensively studied between two hyperbolic metamaterials (HMMs) due to unlimited wavevectors and high photonic density of state. In this work, we…
This study explores the integration of thermoelectric generators (TEGs) and phase change materials (PCMs) to enhance the efficiency of photovoltaic (PV) panels in high-temperature conditions. An AP-PM-20 Polycrystalline PV panel,…
The decrease of solar cell efficiency with temperature is a known problem for photovoltaics (PV). Temperature sensitivity can lead to a considerable amount of energy losses over the lifetime of solar panels. In this perspective Hybrid…
Significant progress has been made in the field of thermophotovoltaics, with efficiency recently rising to over 40% due to improvements in cell design and material quality, higher emitter temperatures, and better spectral management.…
A near-field thermophotovoltaic (TPV) system with a multilayer emitter of alternate tungsten and alumina layer is proposed in this paper. The fluctuational electrodynamics along with the dyadic Green function for a multilayered structure is…
We investigate the performance of thermoradiative (TR) cells using the III-V group of semiconductors, which include GaAs, GaSb, InAs, and InP, with the aim of determining their efficiency and finding the best TR cell materials among the…
Germanium telluride (GeTe), a phase-change material, is known to exhibit four different structural phases: three at room temperature (one amorphous and two crystalline, $\alpha$ and $\gamma$) and one at high temperature (crystalline…
Among its many uses, graphene shows significant promise for optical and optoelectronic applications. In particular, devices based on the photothermoelectric effect (PTE) in graphene can offer a strong and fast photoresponse with high…
We are demonstrating the optical control of a specific state of the germanium telluride (GeTe) phase change material and its integration as control element for realizing extremely efficient optically reconfigurable THz devices. The…
Tellurium allows attaining heavy n-type doping levels in GaAs, which is suited to achieve very low contact resistivities in solar cells. Besides, it modifies the energy bandgap of MOVPE-grown GaInP by reducing the group-III sublattice…
A new approach is introduced to significantly improve the performance of thermophotovoltaic (TPV) systems by using low-dimensional thermal emitters and photovoltaic (PV) cells. By reducing the thickness of both the emitter and the PV cell,…
Germanium arsenide (GeAs) is a layered semiconductor with remarkably anisotropic physical, thermoelectric and optical properties, and a promising candidate for multifunctional devices based on in-plane polarization dependent response.…
The bulk photovoltaic effect (BPVE) converts light into a coherent dc current at zero bias, through what is commonly known as the shift current. This current has previously been attributed to the displacement of the electronic wave function…