相关论文: Non-iterative vortex-based smearing correction for…
Two configurations typical of fixed-wing aircraft are simulated with the actuator line method (ALM): a wing with winglets and a T-tail. The ALM is extensively used in rotor simulations to model the blades by body forces, which are…
The suitability of the actuator line method (ALM) to predict flutter instability is theoretically studied by employing a two-dimensional linear model of the ALM undergoing harmonic motion. Three different analytical models of the ALM,…
We evaluate the accuracy of the actuator line model (ALM) approach by performing simulations for the NREL~5~MW wind turbine in uniform inflow using three large eddy simulation codes. The power and thrust coefficients obtained using the…
A linear theory for unsteady aerodynamic effects of the actuator line method (ALM) was developed. This theory is validated using two-dimensional ALM simulations, where we compute the unsteady lift generated by the plunging and pitching…
To bridge the gap between high and low fidelity numerical modeling tools for vertical-axis (or cross-flow) turbines (VATs or CFTs), an actuator line model (ALM) was developed and validated for both a high and a medium solidity vertical-axis…
The actuator line method (ALM) is an approach commonly used to represent lifting and dragging devices like wings and blades in large-eddy simulations (LES). The crux of the ALM is the projection of the actuator point forces onto the LES…
In this work the accuracy of the Actuator Line Model (ALM) in Large Eddy Simulations of wind turbine flow is studied under the specific conditions of very coarse spatial resolutions. For finely-resolved conditions, it is known that ALM…
We compare three different methodologies for simulation of turbulent flow past a vertical axis wind turbine: (i) full resolution of the turbine blades in a Direct Finite Element Simulation (DFS), (ii) implicit representation of the turbine…
The actuator line model (ALM) is a commonly used method to represent lifting surfaces such as wind turbine blades within Large-Eddy Simulations (LES). In the ALM the lift and drag forces are replaced by an imposed body force which is…
Nonlinear unsteady vortex lattice-vortex particle methods (NL-UVLM-VPM) provide medium-fidelity predictions of rotorcraft aerodynamics with explicit three-dimensional wake representations at a moderate computational cost. This study…
Developed to alleviate prohibitive labeling costs, active learning (AL) methods aim to reduce label complexity in supervised learning. While recent work has demonstrated the benefit of using AL in combination with large pre-trained language…
Yaw control has proven to be promising in alleviating the wake effects that plague the efficiency of wind farms. In this work, the actuator line modeling (ALM) method is adopted to simulate the flows over two tandem turbines distanced by $3…
Actuator line model has been widely employed in wind turbine simulations. However, the standard actuator line model does not include a model for the turbine nacelle which can significantly impact turbine wake characteristics as shown in the…
Aerial manipulation (AM) expands UAV capabilities beyond passive observation to contact-based operations at high altitudes and in otherwise inaccessible environments. Although recent advances show promise, most AM systems are developed in…
Numerical models of the flow and wakes due to turbines operating within a real-scale offshore wind farm can lead to a prohibitively large computational cost, particularly when considering blade-resolved simulations. With the introduction of…
In this paper, we propose an inexact Augmented Lagrangian Method (ALM) for the optimization of convex and nonsmooth objective functions subject to linear equality constraints and box constraints where errors are due to fixed-point data. To…
The linear model uses the space defined by the input to project the target or desired signal and find the optimal set of model parameters. When the problem is nonlinear, the adaption requires nonlinear models for good performance, but it…
This paper compares two actuator line methodologies for modelling wind turbines employing high-order h/p solvers and large-eddy simulations. The methods combine the accuracy of high-order solvers (in this work the maximum order is 6) with…
The goal of this paper is to create a new framework for dense SLAM that is light enough for micro-robot systems based on depth camera and inertial sensor. Feature-based and direct methods are two mainstreams in visual SLAM. Both methods…
The linearization of nonlinear systems is an important digital enhancement technique. In this paper, a real-time capable post- and pre-linearization method for the widely applicable time-varying discrete-time Volterra series is presented.…