相关论文: High-quality femtosecond laser surface micro/nano-…
Femtosecond pulsed lasers have been widely used over the past decades due to their capability to fabricate precise patterns at the micro- and nano- lengths scales. A key issue for efficient material processing is the determination of the…
Laser excitation has emerged as a means to expose hidden states of matter and promote phase transitions on demand. Such laser induced transformations are often rendered possible owing to the delivery of spatially and/or temporally…
Ultrashort (femtosecond, fs) laser pulses have fascinating properties as they allow to confine optical energy on extreme scales in space and time. Such fs-laser pulsed beams can be seen as spatially thin slices of intense light that are…
It is well known that optical emission produced by femtosecond laser-induced breakdown on a surface may be enhanced by using a pair of laser pulses separated by a suitable delay. Here we elucidate the mechanism for this effect both…
The resonant slow light structures created along a thin-walled optical capillary by nanoscale deformation of its surface can perform comprehensive simultaneous detection and manipulation of microfluidic components. This concept is…
Foam has been suggested to reduce laser imprint because of its low density. In this paper, the two-dimensional radiation hydrodynamic code FLASH is applied to investigate and characterize the strength of laser imprint through analyzing…
We report an ultrafast, parallel and beyond-the-master micro-patterning technique for ultrathin (30 nm-400 nm) non-absorbing polymer films by diffraction of a laser light through a two dimensional periodic aperture. The redistribution of…
The formation of laser-induced periodic surface structures (LIPSS, ripples) upon irradiation of silicon with multiple irradiation sequences consisting of femtosecond laser pulse pairs (pulse duration 150 fs, central wavelength 800 nm) is…
Fast fabrication of micro-optical elements for generation of optical vortex beams based on the q-plate design is demonstrated by femtosecond (fs) laser ablation of gold film on glass. Q-plates with diameter of ~0.5 mm were made in ~1 min…
We present that surface two-plasmon resonance (STPR) in electron plasma sheet produced by femtosecond laser irradiating metal surface is the self-formation mechanism of periodic subwavelength ripple structures. Peaks of overdense electrons…
The presented study highlights the efficiency of employing a KrF excimer laser to create diverse types of periodic nanostructures (LIPSS - laser induced periodic surface structures) on polyether ether ketone (PEEK) and polyethylene…
The emergence of far-field super-resolution microscopy has rejuvenated the possibility for nanoscale imaging. Approaches to far-field super-resolution that utilize point scanning often depends on spatially reducing the size of the focused…
Three-dimensional nanostructured functional materials are important systems, allowing new means to intricately control electromagnetic properties. A key problem is realising a 3D printing methodology upon the nanoscale that can yield a…
The data of experimental studies of optical characteristics of colloidal solutions, composition and morphology of its dispersed phase, resulting from laser ablation of zinc in aqueous solutions of anionic surfactants --- sodium dodecyl…
Control over the properties of nanoparticles obtained by laser ablation in liquids is experimentally demonstrated via modulation of the beam intensity profile on the target. Mask projection scheme was used with either a copper laser…
We consider the case of surface irradiation by a small number of femtosecond laser shots leading to the formation of surface ripples. To explain this effect, we propose a numerical model that accounts for the following processes: (i)…
The microlens is a key enabling technology in optoelectronics, permitting light to be efficiently coupled to and from devices such as image sensors and light-emitting diodes. Their ubiquitous nature motivates the development of new…
In laser micromachining, the ablation threshold (minimum fluence required to cause ablation) is a key performance parameter and overall indicator of the efficiency of material removal. For pulsed laser micromachining, this important…
In the present work we have studied the possibility of laser welding and ablation of biological tissue by the using of spherical metal nanoparticles (NPs) and infrared laser irradiation which spectrally located far from plasmon resonances.…
Producing monolayers and few-layers in high yield with environment-stability is still a challenge in hafnium disulphide (HfS2), which is a layered two-dimensional material of group-IV transition metal dichalcogenides, to reveal its unlocked…