相关论文: Super-High-Frequency Low-Loss Sezawa Mode SAW Devi…
Surface Acoustic Wave (SAW) devices featuring Aluminum Scandium Nitride (AlScN) on a 4H-Silicon Carbide (SiC) substrate, offer a unique blend of high sound velocity, low thermal resistance, substantial piezoelectric response, simplified…
Surface acoustic wave (SAW) resonators provide a compact platform for confining microwave-frequency phonons and are widely used in radio-frequency technologies, but their operation at gigahertz frequencies and cryogenic temperatures remains…
Surface acoustic waves (SAWs) enable a wide array of technologies including RF filters, chemical and biological sensors, acousto-optic devices, acoustic control of microfluidic flow in lab-on-a-chip systems, and quantum phononics. While…
We present systematic measurements of the quality factors of surface acoustic wave (SAW) resonators on ST-X quartz in the gigahertz range at a temperature of $10 \, \textrm{mK}$. We demonstrate a internal quality factor $Q_\mathrm{i}$…
In this work, an Aluminum Scandium Nitride (AlScN) on Diamond Sezawa-mode surface acoustic wave (SAW) platform for RF filtering at Ku-band (12-18 GHz) is demonstrated. Thanks to the high acoustic velocity and low-loss diamond substrate, the…
High frequency acoustic devices based on two-dimensional (2D) materials are unique platforms to design and manipulate the spatiotemporal response of acoustic waves for next-generation sensing and contactless actuation applications.…
Surface acoustic waves have emerged as one of the potential candidates for the development of next-generation wave-based information and computing technologies. For practical devices, it is essential to develop the excitation techniques for…
Low-phase-noise microwave-frequency integrated oscillators provide compact solutions for various applications in signal processing, communications, and sensing. Surface acoustic waves (SAW), featuring orders-of-magnitude shorter wavelength…
We report on all-optical generation and detection of high-frequency (up to about 30 GHz) surface acoustic waves (SAWs) in GaAs/AlGaAs heterostructures with short-period Au gratings on top. A highly sensitive method for SAW detection is…
Interdigitated transducers were used to generate and detect surface acoustic waves on a thin layer of (Ga,Mn)(As,P). The out-of-plane uniaxial magnetic anisotropy of this dilute magnetic semiconductor is very sensitive to the strain of the…
Surface acoustic waves (SAWs), with their five orders-of-magnitude slower propagation velocity, allow for considerably shorter wavelengths at the same frequency compared to electromagnetic waves. The short wavelengths allow for device…
The interaction of surface acoustic waves (SAW) with $p$-type Si/Si$_{0.87}$Ge$_{0.13}$ heterostructures has been studied for SAW frequencies of 30-300 MHz. For temperatures in the range 0.7$<T<$1.6 K and magnetic fields up to 7 T, the SAW…
Surface Acoustic Wave gas sensors have garnered increasing attention as highly sensitive, miniaturized, and wireless compatible platforms for molecular detection. Their unique ability to convert surface perturbations into measurable…
Surface acoustic waves (SAWs) coupled to quantum dots (QDs), trapped atoms and ions, and point defects have been proposed as quantum transduction platforms, yet the requisite coupling rates and cavity lifetimes have not been experimentally…
We demonstrate high-frequency (> 3 GHz), high quality factor radio frequency (RF) resonators in unreleased thin film gallium nitride (GaN) on sapphire and silicon carbide substrates by exploiting acoustic guided mode (Lamb wave) resonances.…
Established techniques for characterizing a layer on a substrate system via surface acoustic wave (SAW) dispersion measurement are often slow due to the need for scanning excitation or detection positions. We present a method for…
Guiding and manipulating GHz frequency acoustic waves in $\mu$m-scale waveguides and resonators opens up new degrees of freedom to manipulate radio frequency (RF) signals in chip-scale platforms. A critical requirement for enabling…
We investigate the propagation of a piezoelectric surface acoustic wave (SAW) across a GaAs/Al$_X$Ga$_{1-X}$As heterostructure surface, on which there is fixed a metallic split-gate. Our method is based on a finite element formulation of…
In the same way that micro-mechanical resonators resemble guitar strings and drums, Surface Acoustic Waves (SAW) resemble the sound these instruments produce, but moving over a solid surface rather than through air. In contrast with…
Band structure engineering in surface acoustic wave (SAW) metamaterials could advance both classical telecommunications and quantum information processing. However, no imaging technique has demonstrated the necessary capability to resolve…