相关论文: Surface temperature and emissivity measurement for…
Despite being regarded as a well-established field, temperature measurement continues to pose significant challenges for many professionals in the metrology industry. Thermal imagers enable fast, non-contact and a full field measurement,…
This work developed an accurate and robust absorption-based method for spatially resolved measurements of gas temperatures in flames and reacting flows, with typical single-measurement uncertainties on the order of 1\%. This method exploits…
In this laboratory-based study, a plate was designed, manufactured and then characterised thermally and dimensionally using a thermal imager. This plate comprised a range of known scratch, dent, thinning and pitting artefacts as mimics of…
Two-color ratio pyrometry is commonly used to measure the surface temperature of aerospace materials during plasma wind tunnel experiments. However, the effect of the plasma radiation on the measurement accuracy is often neglected. In this…
We introduce a technique based on infrared thermal emission, termed depth thermography, that can remotely measure the temperature distribution beneath the surface of certain objects. Depth thermography utilizes the thermal-emission spectrum…
The temperature-dependent photoluminescence of perovskite quantum dots (CsPbBr3) in the visible band, is analyzed to evaluate their suitability for use in thermometry. A differential measurement of the photoluminescence can be used to…
Thermography allows for the remote measurement of surface temperatures and is widely used for the identification of energy losses, damage detection or quality control. However, thermal imaging is strongly material dependent and therefore…
The thermographic phosphor ScVO4:Bi3+ is used to obtain time-resolved surface temperature measurements with sub-oC precision at 5 kHz. Measurements are used to study transient heat loss and flame-wall interactions (FWI) within a dedicated…
In this paper the methodology and the results of a quasi real-time thermal characterization tool and method for the temperature mapping of circuits and boards based on sensing the infrared radiation will be introduced. With the proposed…
Infrared (IR) thermography provides 2D radiance maps of the IR radiation leaving the surfaces of a scene, based on preliminary calibration. Then, to convert radiance maps into temperature maps, we need to know the emissivity of each element…
This paper presents the development of instrumentation for the measurement of high-temperature thermal conductivity of bulk and coatings using a modulated photothermal radiometry (MPR) method, where a sample is heated by an…
Data on thermal absorptivity and emissivity are important for calculations of heat flows in cryogenic devices. Although thermal radiative properties of materials used in cryogenics are measured, published and used for more than sixty years…
In the described device, the thermal emissivity or absorptivity of the sample is measured by substitution of the radiative heat flow between two parallel surfaces by thermal output of a heater. Fast measurements of the mutual emissivity for…
Measurements of surface temperature fields are used to determine the heat transfer by conduction and convection from an inhomogeneously heated metallic tube into environment. For most of the here reported measurements we use a low-cost…
Estimation of thermal contact resistances between cylinders can be achieved using heating on the cross sections by a laser spot and measurement of the temperature response by IR thermography. This type of measurement makes it possible to…
In this paper we present and analyse determinations of effective temperatures of planet-hosting stars using infrared (IR) photometry. One of our goals is the comparison with spectroscopic temperatures to evaluate the presence of systematic…
The radiative response of any object is governed by a surface parameter known as emissivity. Tuning the emissivity of surfaces has been of great interest in many applications involving thermal radiation such as thermophotovoltaics, thermal…
We present a non-invasive technique for measuring the thermal conductivity of fragile and sensitive materials. In the context of planet formation research, the investigation of the thermal conductivity of porous dust aggregates provide…
We present an experimental setup and methodology designed to facilitate high-precision thermal measurements required for infrared medical tomography. The approach which is best suited for the study of specialized hardware phantoms comprises…
Quantitative thermal imaging has the potential of reliable temperature measurement across an entire field-of-view. This non-invasive technique has applications in aerospace, manufacturing and process control. However, robust temperature…