相关论文: Direct (3+1)D laser writing of graded-index optica…
Graded-index optical elements are capable of shaping light precisely and in very specific ways. While classical freeform optics uses only a two-dimensional domain such as the surface of a lens, recent technological advances in laser…
We demonstrate the fabrication of volume holograms using 2-photon polymerization with dynamic control of light exposure. We refer to our method as (3+1)D printing. Volume holograms that are recorded by interfering reference and signal beams…
A powerful fabrication strategy based on three-dimensional direct laser writing for the rapid prototyping of opto-mechanical components with critical features ranging from several hundred nm to a few mm is demonstrated here. As an example,…
We present here our recent progress in the three-dimensional (3D) direct laser writing (DLW) of step-index core waveguides inside diverse technologically relevant dielectric substrates, with specific emphasis on the demonstration of DLW…
We demonstrate a novel, composite laser written 3D waveguide, fabricated in boro-aluminosilicate glass, with a refractive index contrast of 1.12 x 10^-2. The waveguide is fabricated using a multi-pass approach which leverages the respective…
This study reports the successful fabrication of high-positive refractive index change waveguides, exceeding 0.02 in fluoride glasses, marking a significant advancement in integrated optical components for visible to mid-infrared…
Additive manufacturing using light is commonly constrained by serial voxel-by-voxel or layer-by-layer processing, which fundamentally limits fabrication speed and scalability. Here, we introduce a single-exposure holographic…
3D printing allows rapid fabrication of complex objects from digital designs. One 3D-printing process, direct laser writing, polymerises a light-sensitive material by steering a focused laser beam through the shape of the object to be…
Dense and efficient circuits with component sizes approaching the physical limit is the hallmark of high performance integration. However, current fabrication technology is mostly constraint to 2D lithography, and thermal energy dissipation…
The 3D printing technology based on digital light processing (DLP) has highlighted its powerful manufacturing capabilities for optical components. However, the printing structure obtained by DLP based down projection printing is easily…
Mass production of photonic integrated circuits requires high-throughput wafer-level testing. We demonstrate that optical probes equipped with 3D-printed elements allow for efficient coupling of light to etched facets of nanophotonic…
We propose to use femtosecond direct laser writing technique to realize dielectric optical elements from photo-resist materials for the generation of structured light from purely geometrical phase transformations. This is illustrated by the…
Most additive manufacturing processes today operate by printing voxels (3D pixels) serially point-by-point to build up a 3D part. In some more recently-developed techniques, for example optical printing methods such as projection…
The reproduction of automobile components through additive manufacturing presents significant geometric challenges, as many automotive parts feature complex, organically shaped surfaces that are difficult to fabricate accurately using…
Multi-plane light converters (MPLCs) are an emerging 3D beam shaping technology capable of deterministically mapping a basis of input spatial light modes to a new basis of output modes. The ability to perform such spatial reformatting…
Immersion optics enable creation of systems with improved optical concentration and coupling by taking advantage of the fact that the luminance of light is proportional to the square of the refractive index in a lossless optical system.…
Integration of complex photonic structures onto optical fiber facets enables powerful platforms with unprecedented optical functionalities. Conventional nanofabrication technologies, however, do not permit viable integration of complex…
Optical fibre is drawn from a dual-head 3D printer fabricated preform made of two optically transparent plastics with a high index core (NA ~ 0.25, V > 60). The asymmetry observed in the fibre arises from asymmetry in the 3D printing…
Nanostructuring hard optical crystals has so far been exclusively feasible at their surface, as stress induced crack formation and propagation has rendered high precision volume processes ineffective. We show that the inner chemical etching…
We present a novel method to fabricate low bend loss femtosecond-laser written waveguides that exploits the differential thermal stabilities of laser induced refractive index modifications. The technique consists of a two-step process; the…