相关论文: Exploring the Correlation between Solvent Diffusio…
Coherent topologically close-packed nanoplates in magnesium alloys can effectively improve strength and creep resistance.However, the formation mechanisms of several metastable TCP nanoplates remain unclear, and the traditional…
Magnesium (Mg) and its alloys offer great potential for reducing vehicular mass and energy consumption due to their inherently low densities. Historically, widespread applicability has been limited by low strength properties compared to…
A high-throughput experimental approach is presented to extract the anisotropic interdiffusion coefficient by combining information over the composition profiles obtained by the electron probe microanalysis (EPMA) and the grain orientation…
A high-throughput methodology is proposed, based on the combination of diffusion couples and advanced nanomechanical testing methods, to directly measure alloying effects on the critical resolved shear stress (CRSS) of individual…
The experimental data in the literature for the hcp phase of the Mg-Al-Zn ternary system have been critically reviewed. Based on the concentration profiles from the literature, the diffusion coefficients have been re-extracted using the…
The creep behaviour of a creep-resistant AE42 magnesium alloy reinforced with Saffil short fibres and SiC particulates in various combinations has been examined in the longitudinal direction, i.e., the plane containing random fibre…
Understanding the creep mechanisms and deformation response at different stresses and temperatures is crucial for design using nickel-base superalloys for high-temperature applications. In this study, the creep behaviour of a newly designed…
A systematic study of the compression creep properties of a single-crystalline Co-base superalloy (Co-9Al-7.5W-2Ta) was conducted at 950 {\deg}C, 975 {\deg}C and 1000 {\deg}C to reveal the influence of temperature and the resulting…
Active room temperature diffusion-less climb of the <a> edge dislocations in model Mg-Al alloys was observed using molecular dynamics simulations. Dislocations on prismatic and pyramidal I planes climb through the basal plane to overcome…
The creep behaviour and microstructural evolution of a Sn-3Ag-0.5Cu wt.% sample with a columnar microstructure have been investigated through in-situ creep testing under constant stress of 30 MPa at 298 K. This is important, as 298 K is…
The problem of estimation of the tracer diffusion coefficients is solved by utilizing a novel tracer-interdiffusion couple technique even in the absence suitable radioisotope of one of the components and absence of reliable thermodynamic…
High-entropy alloys (HEAs) comprise a compositionally complex class of materials that in certain cases exhibit outstanding mechanical properties. While substantial progress has been made in understanding their phase stability,…
The tensile creep performance of a polycrystalline Co/Ni-base superalloy with a multimodal gamma prime distribution has been examined at 800C and 300MPa. The rupture life of the alloy is comparable to that of RR1000 tested under similar…
The microstructure of Mg-Al-Ca alloys consists of a hard intra- and intergranular eutectic Laves phase network embedded in a soft $\alpha$-Mg matrix. For such heterogeneous microstructures, the mechanical response and co-deformation of both…
The hot-wall metal-organic chemical vapor deposition (MOCVD), previously shown to enable superior III-nitride material quality and high performance devices, has been explored for Mg doping of GaN. We have investigated the Mg incorporation…
Co-base superalloys are considered as promising high temperature materials besides the well-established Ni-base superalloys. However, Ni appears to be an indispensable alloying element also in Co-base superalloys. To address the influence…
Refractory high-entropy alloys (RHEAs) have emerged as promising candidates for extreme high-temperature applications, for example, in next-generation turbines and nuclear reactors. In such applications, atomic diffusion critically governs…
We apply a combinatorial approach to study the influence of Mg concentration on the precipitation kinetics in an Al-Cu-Li alloy using a diffusion couple made by linear friction welding. The precipitation kinetics is monitored in the…
Iron self-diffusion in nano-composite FeZr alloy has been investigated using neutron reflectometry technique as a function of applied compressive stress. A composite target of (Fe+Zr) and (57Fe+Zr) was alternatively sputtered to deposit…
The diffusion kinetics in a CoCrFeMnNi high entropy alloy is investigated by a combined radiotracer--interdiffusion experiment applied to a pseudo-binary Co$_{15}$Cr$_{20}$Fe$_{20}$Mn$_{20}$Ni$_{25}$ /…