相关论文: Ionic conductivity optimization of composite polym…
Ionic electro-active polymers (EAP) are able to deform under the action of an electric field, which confers them many applications as sensor, actuator or energy recovery.An ionic metal-polymer composite (IPMC) consists in an ionic polymer…
Ion-implantation of normally insulating polymers offers an alternative to depositing conjugated organics onto plastic films to make electronic circuits. We used a 50 keV nitrogen ion beam to mix a thin 10 nm Sn/Sb alloy film into the…
Microfluidic channels with embedded ion permselective medium under the application of electric current are commonly used for electrokinetic processes as on-chip ion concentration polarization (ICP) and bioparticle preconcentration to…
Near-room-temperature electronic transport of annealing induced semiconducting crystallites embedded within its amorphous counterpart is treated within the effective-medium approach. As such, the mixtures transport coefficients become…
Ionic transport in solid electrolytes can often be approximated as ions performing a sequence of hops between distinct lattice sites. If these hops are uncorrelated, quantitative relationships can be derived that connect microscopic hopping…
This chapter deals with the fundamental properties of polymer nanocomposites (PNC) and their characteristics that play a significant role in deciding their capability for the advanced energy storage device. The various synthesization…
The efficiency of nanopore-based polymer sensing devices depends on the fast capture of anionic polyelectrolytes by negatively charged pores. This requires the cancellation of the electrostatic barrier associated with repulsive polymer-pore…
This paper investigates the thermoelectric properties of solid polymer electrolytes (SPE) containing lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) salts, along with carbon-based…
The pyroresistive response of conductive polymer composites (CPCs) has attracted much interest because of its potential applications in many electronic devices requiring a significant responsiveness to changes in external physical…
Mixing heterogeneous Li-ion conductive materials is one of potential ways to enhance the Li-ion conductivity more than that of the parent materials. However, the development of the mixtures had not exhibited significant progress because it…
We have performed a dielectric investigation of the ionic charge transport and the relaxation dynamics in plastic-crystalline 1-cyano-adamantane (CNA) and in two mixtures of CNA with the related plastic crystals adamantane or 2-adamantanon.…
Organic electrochemical transistors are extensively studied for applications ranging from bioelectronics to analog and neuromorphic computing. Despite significant advances, the fundamental interactions between the polymer semiconductor…
Conducting Polymer Dendrites (CPD) are truly inspiring for unconventional electronics that shapes topological circuitries evolving upon an application. Driven by electrochemical processes, an electrochemical impedance rules signal…
In this study, we propose a theoretical framework to investigate the interactions between flexible polymer chains, specifically polyelectrolytes (PEs). By calculating the system's free energy while considering position-dependent mutual…
The effect of ions has received one of the highest priorities in R&D for the damping rings of the International Linear Collider(ILC). It is detrimental to the performance of the electron damping ring. In this note, an update concerning the…
Next-generation high-efficiency Li-ion batteries require an electrolyte that is both safe and thermally stable. A possible choice for high performance all-solid-state Li-ion batteries is a liquid crystal, which possesses properties…
Polyelectrolyte multilayers (PEM) in combination with good electrolyte solvents, e.g., ionic liquids (ILs) are potential candidates for the new generation of electrochemical separators. Swelling PEM with aqueous IL solutions is one way to…
A set of uniform carbon microspheres (CS) whose diameters have the order of $ 0.125 \mu m$ to $10 \mu m $ was prepared from aqueous sucrose solution by means of hydrothermal carbonization of sugar molecules. A pressed pellet was composed by…
We have developed a technique to tune the carrier density in graphene using a lithium-ion-based solid electrolyte. We demonstrate that the solid electrolyte can be used as both a substrate to support graphene and a back gate.It can induce a…
This paper explores the mechanical behaviour of the composite materials used in modern lithium-ion battery electrodes. These contain relatively high modulus active particle inclusions within a two-component matrix of liquid electrolyte…