相关论文: Sintering BFO targets for sputtering

Advancing the functional performance of bismuth ferrite (BiFeO$_3$) requires precise control over phase stability and microstructure, challenges often complicated by secondary phase formation within the Bi$_2$O$_3$-Fe$_2$O$_3$ system. In…

The Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) ceramics were successfully prepared by sol-gel process, and sintered at 1420 degree. The effect of sintering times (2, 4 and 6 h) on structural, microstructural, electric properties, energy storage, and…

Flash sintering is an approach allowing reducing the sintering time to mere seconds. To improve the microstructures and the properties of flash sintered specimens, this process has been successfully adapted to pressure assisted sintering…

Multiferroic materials attract considerable interest because of the wide range of potential applications such as spintronic devices, data storage and sensors. As a strong candidate for the applications among the limited list of single-phase…

The synthesis as well as structural, multiferroic and optical characterization of Dy doped BiFeO$_3$ multiferroic ceramic are presented. Bulk polycrystalline Bi$_{0.9}$Dy$_{0.1}$FeO$_3$ sample is synthesized by solid state reaction, while…

The perovskite (1-x)YMnO$_3$-xBiFeO$_3$ binary system is very promising because of its multiferroic end members. Nanocrystalline phases have been recently obtained by mechanosynthesis across the system, and the perovskite structural…

We have investigated the structural and magnetic properties of BiFeO$_3$ (BFO) thin films grown over (100)-oriented Si substrates by rf magnetron sputtering in a new route under O$_2$ free low pressure Ar atmosphere. Single-phase BFO films…

Single phase BiFeO3 nanoparticles have been successfully synthesized for the first time by a novel citrate combustion method without using any solvent. Well mixed metal nitrates along with citric acid which is used as fuel combust to give…

The complex dielectric permittivity of a sintered ceramic tablet consisting of 70.5 % $BiFeO_{3}$ and 27.7% $Bi_{2}Fe_{4}O_{9}$ was analyzed as a function of temperature from -120 {\deg}C to 230 {\deg}C. The results reveal a complicated…

Structural, electrical and magnetic properties of Bi0.9-xLa0.1ErxFeO3 (BLEFOx) (x = 0.05, 0.07, 0.1) polycrystalline ceramics prepared by solid solution route were studied. A phase transition from rhombohedral phase to monoclinic phase was…

In this investigation, we have synthesized BiFeO$_{3}$ nanoparticles by varying hydrothermal reaction temperatures from 200 $^{\circ}$C to 120 $^{\circ}$C to assess their visible-light-driven photocatalytic activity along with their…

We obtained amorphous-FeAs-free SmFeAsO1-xFx using a low temperature sintering with slow cooling. SmFeAsO1-xFx is sintered at 980 {\deg}C for 40 hours and cooled slowly down to 600 {\deg}C. The low temperature sintering suppresses the…

In this investigation, undoped BiFeO$_3$, Gd doped Bi$_{0.9}$Gd$_{0.1}$FeO$_3$, and Gd-Ti co-doped Bi$_{0.9}$Gd$_{0.1}$Fe$_{1-x}$Ti$_x$O$_3$ (x = 0.10, 0.20) materials were synthesized to report their multiferroic properties. The structural…

The potential utilization of two-stage sintering for the production of highly dense and pure nickel diniobate (Ni4Nb2O9) ceramics with low firing temperature was demonstrated. Effects of designed sintering conditions on phase formation,…

Potassium tantalate (KTaO$_{3}$) is a promising material for dielectric applications at low temperature. However, dense and single-phase ceramics cannot be obtained by conventional sintering because of the evaporation of potassium that…

We report inelastic neutron scattering measurements of the phonon spectra in a pure powder sample of the multiferroic material BiFeO3. A high-temperature range was covered to unravel the changes in the phonon dynamics across the Neel (T_N ~…

BiFeO3 (BFO) multiferroic oxide has a complex phase diagram that can be mapped by appropriately substrate-induced strain in epitaxial films. By using Raman spectroscopy, we conclusively show that films of the so-called supertetragonal T-BFO…

Ceramic samples, produced by conventional sintering method in ambient air, 6H-SrMnO$_3$(6H-SMO), 15R-BaMnO$_3$(15R-BMO), 4H-Ba$_{0.5}$Sr$_{0.5}$MnO$_3$(4H-BSMO) were studied. In the XRD measurements for SMO the new anomalies of the lattice…

High temperature powder neutron diffraction experiments have been conducted around the reported beta-gamma, insulator-metal phase transition (~ 930 C) in BiFeO3. The results demonstrate that while a small volume contraction is observed at…

A safe, simple and easily scaleable one-step sintering method is proposed to fabricate newly discovered superconductors of SmO1-xFxFeAs. Superconducting transition with the onset temperature of 54.6 K and high critical fields Hc2(0) >=200 T…