相关论文: A Measurement of Source Noise at Low Frequency: Im…

We analyse a 154 MHz image made from a 12 h observation with the Murchison Widefield Array (MWA) to determine the noise contribution and behaviour of the source counts down to 30 mJy. The MWA image has a bandwidth of 30.72 MHz, a…

Many astronomical sources produce transient phenomena at radio frequencies, but the transient sky at low frequencies (<300 MHz) remains relatively unexplored. Blind surveys with new widefield radio instruments are setting increasingly…

We present a search for transient and variable radio sources at 154 MHz with the Murchison Widefield Array 32-tile prototype. Fifty-one images were obtained that cover a field of view of 1430 deg^2 centred on Hydra A. The observations were…

We present a method for subtracting point sources from interferometric radio images via forward modeling of the instrument response and involving an algebraic nonlinear minimization. The method is applied to simulated maps of the Murchison…

We present a Stokes I, Q and U survey at 189 MHz with the Murchison Widefield Array 32-element prototype covering 2400 square degrees. The survey has a 15.6 arcmin angular resolution and achieves a noise level of 15 mJy/beam. We demonstrate…

The Murchison Widefield Array (MWA) is a new low-frequency, wide field-of-view radio interferometer under development at the Murchison Radio-astronomy Observatory (MRO) in Western Australia. We have used a 32-element MWA prototype…

We present an in-situ antenna characterization method and results for a "low-frequency" radio astronomy engineering prototype array, characterized over the 75-300 MHz frequency range. The presence of multiple cosmic radio sources,…

We present a survey for transient and variable sources, on timescales from 28 seconds to $\sim$1 year, using the Murchison Widefield Array (MWA) at 182 MHz. Down to a detection threshold of 0.285 Jy, no transient candidates were identified,…

We have observed an area of approximatley 27 deg^2 to an rms noise level of less than 0.2 mJy at 15.7 GHz, using the Arcminute Microkelvin Imager Large Array. These observations constitute the most sensitive radio-source survey of any…

We characterize the low frequency radio-frequency interference (RFI) environment at the Murchison Radio-astronomy Observatory (MRO), the location selected for the low-frequency component of the Square Kilometre Array. Data were collected…

We present the results of an approximately 6,100 square degree 104--196MHz radio sky survey performed with the Murchison Widefield Array during instrument commissioning between 2012 September and 2012 December: the Murchison Widefield Array…

Transient radio signals of astrophysical origin present an avenue for studying the dynamic universe. With the next generation of radio interferometers being planned and built, there is great potential for detecting and studying large…

We describe the source subtraction strategy and observations for the extended Very Small Array, a CMB interferometer operating at 33 GHz. A total of 453 sources were monitored at 33 GHz using a dedicated source subtraction baseline. 131…

The Murchison Widefield Array (MWA) is a new low-frequency interferometric radio telescope built in Western Australia at one of the locations of the future Square Kilometre Array (SKA). We describe the automated radio-frequency interference…

The flux density from undetected sources in the observing beam of a telescope produces source confusion noise in the resulting maps of the sky, and thus limits sensitivity. In a recent paper we discussed this effect in the…

Refraction and diffraction of incoming radio waves by the ionosphere induce time variability in the angular positions, peak amplitudes and shapes of radio sources, potentially complicating the automated cross-matching and identification of…

We present here the results of a 325 MHz radio survey of M31, conducted with the A-configuration of the Very Large Array. The survey covered an area of 7.6 deg$^2$, and a total of 405 radio sources between $\la$6\arcsec and 170\arcsec in…

We describe the method used to detect sources for the Herschel-ATLAS survey. The method is to filter the individual bands using a matched filter, based on the point-spread function (PSF) and confusion noise, and then form the inverse…

With the upgrade from GRAVITY to GRAVITY$^+$ the instrument will evolve into an all-sky interferometer that can observe faint targets, such as high redshift AGN. Observing the faintest targets requires reducing the noise sources in GRAVITY…

The heating, ventilation and air conditioning systems serving the experimental halls of the Virgo gravitational wave interferometer generate low-frequency noise - namely below 100 Hz - of seismic, acoustic, and electromagnetic origin. Such…