相关论文: Large Eddy Simulation of MILD combustion using PDF…
The results of large eddy simulation (LES) using three sub-grid scale models, namely: constant coefficient Smagorinsky, dynamic Smagorinsky, and a dynamic Clark model, for rotating stratified turbulence in the absence of forcing using…
Numerical modeling of turbulent spray combustion provides a promising tool for advanced engine design. In spray flames, the droplet evaporation not only reduces the ambient gas temperature, but also influences flame structure by generating…
This paper studies the large-eddy simulation (LES) of isothermal turbulent channel flows. We investigate zero-equation algebraic models without wall function or wall model: functional models, structural models and mixed models. In addition…
A numerical study for a hydrogen (H2) jet in an air crossflow (JICF) was performed using direct numerical simulation (DNS), large eddy simulation (LES), and Reynolds-averaged Navier-Stokes (RANS) approaches, based on a geometry…
We present a numerical method for Large Eddy Simulations (LES) of compressible two-phase flows. The method is validated for the flow in a micro channel with a step-like restriction. This setup is representative for typical cavitating…
Current design constraints have encouraged the studies of aeroacoustics fields around compressible jet flows. The present work addresses the numerical study of unsteady turbulent jet flows for aeroacoustic analyses of main engine rocket…
Extending gradient-type turbulence closures to turbulent premixed flames is challenging due to the significant influence of combustion heat release. We incorporate a deep neural network (DNN) into Reynolds-averaged Navier--Stokes (RANS)…
Large Eddy Simulations with flamelet-based thermochemistry are used to investigate the behaviour of a premixed hydrogen-air flame stabilised by a bluff-body. Validation against experimental data is carried out first to demonstrate the…
Dynamics of flames stabilized downstream of different shape bluff-bodies (cylindrical, square, star) with different wall topologies (flat, wavy) is investigated using large-eddy simulations (LES). A two-stage computational procedure…
The effect of swirl, premixedness and geometry has been investigated for hydrogen enriched premixed flame using Large Eddy Simulation (LES) with a Thickened Flame (TF) model. Swirl strength has been varied to study the effects of swirl on…
Most sub-grid scale (SGS) models employed in LES (large eddy simulation) formulations were originally developed for incompressible, single phase, inert flows and assume transfer of energy based on the classical energy cascade mechanism.…
In large-eddy simulations of atmospheric boundary layer turbulence, the lumped coefficient in the eddy-diffusion subgrid-scale (SGS) model is known to depend on scale for the case of inert scalars. This scale dependence is predominant near…
A deep learning (DL) closure model for large-eddy simulation (LES) is developed and evaluated for incompressible flows around a rectangular cylinder at moderate Reynolds numbers. Near-wall flow simulation remains a central challenge in…
A new methodology based on energy flux similarity is suggested in this paper for large eddy simulation (LES) of transitional and turbulent flows. Existing knowledge reveals that the energy cascade generally exists in transitional and…
Climate change necessitates rapid expansion of renewable energy, with wind energy offering a scalable and low-impact solution. However, accurate prediction of wind loads and power generation remains challenging due to uncertainties in wind…
Large-eddy simulation (LES) is able to capture key boundary-layer (BL) turbulence and cloud processes. Yet, large-scale forcing and surface turbulent fluxes of sensible and latent heat are often poorly prescribed for LES simulations. We…
The study presents wall-modeled large-eddy simulations (LES) characterizing the flow features of a neutral atmospheric boundary layer over two urban-like roughness geometries: an array of three-dimensional square prisms and the…
We live in an age in which high-performance computing is transforming the way we do science. Previously intractable problems are now becoming accessible by means of increasingly realistic numerical simulations. One of the most enduring and…
Systems comprising a turbulent channel flow overlaying a permeable bed can be found in a variety of industrial and natural applications (e.g. urban planning, fracking, submerged vegetation). One important realization of this system is at…
The combined influence of elevated pressure and temperature, representative of gas-turbine operating conditions, on lean premixed hydrogen flames is investigated using Direct Numerical Simulations (DNS) of a turbulent jet. Three cases are…