相关论文: Evaluation of dynamic fracture toughness of a bond…
The transition from stick to slip at a dry frictional interface occurs through the breaking of the junctions between the two contacting surfaces. Typically, interactions between the junctions through the bulk lead to rupture fronts…
We perform a detailed theoretical study of the edge fracture instability, which commonly destabilises the fluid-air interface during strong shear flows of entangled polymeric fluids, leading to unreliable rheological measurements. By means…
Tensile tests were conducted on dual-phase high-strength steel in a Split-Hopkinson Tension Bar at a strain-rate in the range of 150-600/s and in a servo-hydraulic testing machine at a strain-rate between 10-3 and 100/s. A novel specimen…
In this work, distortion gradient plasticity is used to gain insight into material deformation ahead of a crack tip. This also constitutes the first fracture mechanics analysis of gradient plasticity theories adopting Nye's tensor as primal…
The stress intensity factor is important for understanding crack initiation and propagation. Because it cannot be measured directly, the characterization of the stress intensity factor relies on the measurement of deformation around a crack…
Cracking is a common failure mode in asphalt concrete (AC) pavements. Many tests have been developed to characterize the fracture behavior of AC. Accurate crack detection during testing is crucial to describe AC fracture behavior. This…
We discuss crack propagation along the interface between two dissimilar materials. The crack edge separates two states of the interface, ``stick'' and ``slip''. In the slip region we assume that the shear stress is proportional to the…
The problem of a crack impinging on an interface has been thoroughly investigated in the last three decades due to its important role in the mechanics and physics of solids. In this investigation, this problem is revisited in view of the…
The effect of substrate was studied using nanoindentation on thin films. Soft films on hard substrate showed more pile up than usual which was attributed to the dislocation pile up at the film substrate interface. The effect of tip blunting…
This work outlines a diffuse interface method for the study of fracture and fragmentation in ductile metals at high strain-rates in Eulerian finite volume simulations. The work is based on an existing diffuse interface method capable of…
The current study explores the analysis of crack in initially stressed, rotating material strips, drawing insights from singular integral equations. In this work, a self-reinforced material strip with finite thickness and infinite extent,…
Dynamic Mode III interfacial fracture in a dissimilar square-cell lattice, composed of two contrasting mass-spring lattice half-planes joined at an interface, is considered. The fracture, driven by a remotely applied load, is assumed to…
In this work, the mode I fracture toughness of dissimilar metal-composite adhesive joints is experimentally investigated using the double cantilever beam (DCB) test. The particular joint under study is resulted by the adhesive joining of a…
Numerous laboratory experiments have demonstrated the dependence of the friction coefficient on the interfacial slip rate and the contact history, a behavior generically called rate and state friction. Although numerical models have been…
Due to the oscillatory singular stress field around a crack tip, interface fracture has some peculiar features. This paper is focused on two of them. One can be reflected by a proposed paradox that geometrically similar structures with…
The transition from static to dynamic friction when an elastic body is slid over another is now known to result from the motion of interface rupture fronts. These fronts may be either crack-like or pulse-like, with the latter involving…
Stress-strain plots based on nanoindentation load-depth curves reflected cracking phenomenon. A transition from ductile to brittle fracture was observed on increasing the depth or load of indenter penetration. A new approach with shape…
The stress field at the tip of a crack of a thin plate of elastic material that is broken due to a mode III shear tearing has a universal form with a non-universal amplitude, known as the stress intensity factor, which depends on the crack…
We investigate dynamic fracture of heterogeneous materials experimentally by measuring displacement fields as a rupture propagates through a periodic array of obstacles of controlled fracture energy. Our measurements demonstrate the…
The presence of interfaces and grain boundaries significantly impacts the mechanical properties of materials, particularly when dealing with micro- or nano-scale samples. Distinct interactions between dislocations and grain boundaries can…