相关论文: Stabilized RANS simulation of surf zone kinematics…

Despite well-known limitations of Reynolds-averaged Navier-Stokes (RANS) simulations, this methodology remains the most widely used tool for predicting many turbulent flows, due to computational efficiency. Machine learning is a promising…

In this work, model closures of the multiphase Reynolds-Average Navier-Stokes (RANS) equations are developed for homogeneous, fully-developed gas--particle flows. To date, the majority of RANS closures are based on extensions of…

This chapter provides an introduction to data-driven techniques for the development and calibration of closure models for the Reynolds-Averaged Navier--Stokes (RANS) equations. RANS models are the workhorse for engineering applications of…

Reynolds-averaged Navier-Stokes (RANS) equations are widely used in engineering turbulent flow simulations. However, RANS predictions may have large discrepancies due to the uncertainties in modeled Reynolds stresses. Recently, Wang et al.…

Reynolds Averaged Navier Stokes (RANS) models represent the workhorse for studying turbulent flows in industrial applications. Such single-point turbulence models have limitations in accounting for the influence of the non-local physics and…

It has previously been shown that by increasing the Reynolds number across a channel by spatially varying the viscosity does not cause an immediate change in the size of turbulent structures and a delay is in fact observed in both wall…

A local artificial neural network (LANN) framework is developed for turbulence modeling. The Reynolds-averaged Navier-Stokes (RANS) unclosed terms are reconstructed by artificial neural network (ANN) based on the local coordinate system…

Numerical simulations based on Reynolds-Averaged Navier--Stokes (RANS) equations are widely used in engineering design and analysis involving turbulent flows. However, RANS simulations are known to be unreliable in many flows of engineering…

This paper applies Bayesian-optimization-RANS (turbo-RANS) to improve Reynolds-averaged Navier-Stokes (RANS) turbulence models for a converging-diverging channel, a case with adverse pressure gradients and flow separation. Using Bayesian…

This paper aims at extending the code verification methodology to high-order accurate scheme implementations on curved wall-bounded domains as well as for realistic turbulent flows such as the flat plate boundary layer modelled by the…

Reynolds-Averaged Navier-Stokes (RANS) models are widely used for turbulent flow simulations due to their computational efficiency, but their accuracy strongly depends on the selected turbulence closure and may vary across the flow domain.…

Predictive simulation of many complex flows requires moving beyond Reynolds-averaged Navier-Stokes (RANS) based models to representations resolving at least some scales of turbulence in at least some regions of the flow. To resolve…

We introduce a field-wide benchmark challenge for machine learning in Reynolds-averaged Navier-Stokes (RANS) turbulence modelling. Though open-source datasets exist for training data-driven turbulence closure models, the field has been…

Aerodynamic prediction of glaze ice accretion on airfoils and wing is studied using the Reynolds-averaged Navier-Stokes method. Two separation fixed turbulence models are developed considering the nonequilibrium characteristics of…

SAM, a plant-level system analysis tool for advanced reactors (SFR, LFR, MSR/FHR) is under development at Argonne. As a modern system code, SAM aims to improve the predictions of 3D flows relevant to reactor safety during transient…

In this paper, a novel zonal machine learning (ML) approach for Reynolds-averaged Navier-Stokes (RANS) turbulence modelling based on the divide-and-conquer technique is introduced. This approach involves partitioning the flow domain into…

This research explores several critical factors affecting CFD-based prediction accuracy of submarine hydrodynamics and builds upon previous work on preliminary mesh and solver benchmarking. A scaled submarine model is analyzed numerically…

Accurate and generalizable Reynolds-averaged Navier-Stokes (RANS) models for turbulent flows rely on effective closures, but currently available closures are notoriously unreliable. Kassinos et al. (J. Fluid Mechanics, 428, pp. 213-248,…

This study aims to enhance the generalizability of Reynolds-averaged Navier-Stokes (RANS) turbulence models, which are crucial for engineering applications. Classic RANS turbulence models often struggle to predict separated flows…

Data from experiments and direct simulations of turbulence have historically been used to calibrate simple engineering models such as those based on the Reynolds-averaged Navier--Stokes (RANS) equations. In the past few years, with the…