相关论文: Simulation of hydrogen permeation through pure iro…
The electrochemical permeation test is one of the most used methods for characterising hydrogen diffusion in metals. The flux of hydrogen atoms registered in the oxidation cell might be fitted to obtain apparent diffusivities. The magnitude…
Hydrogen diffusion and trapping in ferritic steels containing (Ti,Cr)C particles was investigated using electrochemical permeation (EP) and thermal desorption spectroscopy (TDS). The trapping parameters for the test materials were evaluated…
This work presents a fully physical model of the hydrogen diffusion and trapping kinetics in metals, integrating permeation and thermal desorption within a unified framework. Based on the McNabb and Foster approach, it requires only binding…
Hydrogen grain boundary (GB) trapping is widely accepted as the main cause for hydrogen induced intergranular failure. Several studies were conducted to unveil the role of GBs on hydrogen transport; however, a clear understanding is yet to…
The diffusivity of hydrogen in cold-rolled pure iron is investigated using permeation and desorption methods. Electrochemical charging, electro-permeation and thermal desorption spectroscopy (TDS) experiments are conducted. Firstly, the…
Understanding hydrogen-grain boundary (GB) interactions is critical to the analysis of hydrogen embrittlement in metals. This work presents a mesoscale fully kinetic model to investigate the effect of GB misorientation on hydrogen diffusion…
Hydrogen embrittlement of metals is widely observed, but its atomistic origins remain little understood and much debated. Combining a unique identification of interstitial sites through polyhedral tessellation and first-principles…
We present a generalised framework for resolving the electrochemistry-diffusion interface and modelling hydrogen transport near a crack tip. The adsorption and absorption kinetics are captured by means of Neumann-type generalised boundary…
Hydrogen embrittlement in metals is strongly governed by hydrogen diffusion and trapping, yet predicting these effects in polycrystalline systems remains challenging. This work introduces a multiscale modeling framework that links atomistic…
The presence of hydrogen traps within a metallic alloy influences the rate of hydrogen diffusion. The electro-permeation (EP) test can be used to assess this: the permeation of hydrogen through a thin metallic sheet is measured by suitable…
The hydrogen trapping behaviour of metallic alloys is generally characterised using Thermal Desorption Spectroscopy (TDS). However, as an indirect method, extracting key parameters (trap binding energies and densities) remains a significant…
We investigate the influence of microstructural traps on hydrogen diffusion and embrittlement in the presence of cyclic loads. A mechanistic, multi-trap model for hydrogen transport is developed, implemented into a finite element framework,…
The interaction between boron and hydrogen at grain boundaries has been investigated experimentally and numerically in boron-doped and boron-free martensitic steels using thermal desorption spectrometry (TDS) and ab initio calculations. The…
Failures attributed to hydrogen embrittlement are a major concern for metals so a better understanding of damage micro-mechanisms and hydrogen diffusion within the metal is needed. Local concentrations depend on transport phenomena…
Understanding the migration and trapping of CO$_2$ in the subsurface is vital to geologic carbon storage projects. Traditional characterization methods employ steady-state co-injection experiments to determine relative permeability and…
An efficient compositional framework is developed for simulation of CO2 storage in saline aquifers during a full-cycle injection, migration and post-migration processes. Essential trapping mechanisms, including structural, dissolution, and…
We describe a novel method to measure the surface charge densities on optical fibers placed in the vicinity of a trapped ion, where the ion itself acts as the probe. Surface charges distort the trapping potential, and when the fibers are…
We present calculations of free energy barriers and diffusivities as functions of temperature for the diffusion of hydrogen in bcc-Fe. This is a fully quantum mechanical approach since the total energy landscape is computed using a new self…
A model for ionic and electronic grain boundary transport through thin films, scales or membranes with columnar grain structure is introduced. The grain structure is idealized as a lattice of identical hexagonal cells - a honeycomb pattern.…
High-shear methods have long been used in experiments to refine grain structures in metals, yet the underlying mechanisms remain elusive. We demonstrate a refinement process using molecular dynamic simulations of iron, wherein…