相关论文: Properties and influence of microstructure and cry…
Tailoring the physical properties of complex materials for targeted applications requires optimizing the microstructure and crystalline defects that influence electrical and thermal transport, and mechanical properties. Laser surface…
There is an increasing reckoning that the thermoelectric performance of a material is dependent on its microstructure. However, the microstructure-properties relationship often remains elusive, in part due to the complexity of the hierarchy…
We find that laser-induced local melting attracts and deforms grain boundaries in 2D colloidal crystals. When a melted region in contact with the edge of a crystal grain recrystallizes, it deforms the grain boundary --- this attraction is…
Dislocation and grain boundary melting are studied in three dimensions using the Phase Field Crystal method. Isolated dislocations are found to melt radially outward from their core, as the localized excess elastic energy drives a power law…
The influence of microstructure on thermoelectricity is increasingly recognized. Approaches for microstructural engineering can hence be exploited to enhance thermoelectric performance, particularly through manipulating crystalline defects,…
Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to thermally induced grain coarsening, they typically suffer from…
Advanced nanodevices require high-precision machining of thin films using ultrafast lasers. However, thin-film fabrications cause variations in microstructure, crystallographic orientation, and residual stresses owing to coating conditions…
Grain boundary wetting as a preliminary stage for zinc induced grain boundary weakening and embrittlement in a Zn coated press hardened 20MnB8 steel was analyzed by means of electron backscatter diffraction, Auger electron spectroscopy,…
The internal energy associated with the defect microstructure of strongly deformed crystals provides an important driving force for grain boundary motion during recrystallization. Typical dislocation microstructures are strongly…
Grain growth is a key process in the thermomechanical treatment of metals. Recently, the presence of local residual stresses within fully recrystallized grains has attracted increasing interest in connection with shear-coupled grain…
Thermodynamic dislocation theory incorporating dislocation impediment by the grain boundaries is developed to analyze the shear test of polycrystals. With a small set of physics based material parameters, we are able to simulate the…
Achieving a combination of high mechanical strength and high electrical conductivity in low-weight Al alloys requires a full understanding of the relationships between nanoscaled features and physical properties. Grain boundary…
Electrical iron silicon steel is the most commonly used soft magnetic material in electrical energy conversion and transmission, and its demand is expected to increase with the need for electrification of the transportation sector and the…
In this paper, we develop a mean-field model for simulating the microstructure evolution of crystalline materials during static recrystallization. The model considers a population of individual cells (i.e. grains and subgrains) growing in a…
A multi-phase field model is employed to study the microstructural evolution of an alloy undergoing liquid dealloying. The model proposed extends upon the original approach of Geslin et al. to consider dealloying in the presence of grain…
There are still debates regarding the mechanisms that lead to hot cracking in parts build by additive manufacturing (AM) of non-weldable Ni-based superalloys. This lack of in-depth understanding of the root causes of hot cracking is an…
Wire + arc additive manufacture (WAAM) is an attractive method for manufacturing large-scale aerospace components, however the microstructural changes that occur and the effect of interpass rolling are poorly understood. Therefore two…
We study the phenomenon of grain-boundary premelting for temperatures below the melting point in the phase-field crystal model of a pure material with hexagonal ordering in two dimensions. We investigate the structures of symmetric tilt…
The thermal decomposition behavior, the microstructural evolution and its influence on the mechanical properties of a supersaturated Cu Co solid solution with ~100 nm average grain size prepared by severe plastic deformation is investigated…
The additive manufacture of compositionally graded Al/Cu parts by laser engineered net shaping (LENS) is demonstrated. The use of a blue light build laser enabled deposition on a Cu substrate. The thermal gradient and rapid solidification…