相关论文: High temperature strength retention of Cu/Nb nanol…
Molecular dynamics simulations were used to quantify mechanically-induced structural evolution in nanocrystalline Al with an average grain size of 5 nm. A polycrystalline sample was cyclically strained at different temperatures, while a…
We report the results of the Ni-based bulk metallic glass structural evolution and crystallization behavior in situ investigation. The X-ray diffraction (XRD), transmission electron microscopy (TEM), nano-beam diffraction (NBD),…
Solid solution effects on the strength of the finest nanocrystalline grain sizes are studied with molecular dynamics simulations of different Cu-based alloys. We find evidence of both solid solution strengthening and softening, with trends…
Thin-film solid-state metal dealloying (thin-film SSMD) is a promising method for fabricating nanostructures with controlled morphology and efficiency, offering advantages over conventional bulk materials processing methods for integration…
Severe plastic deformation using high-pressure torsion of ternary Cu-based materials (CuFeCo and CuFeNi) was used to fabricate bulk samples with a nanocrystalline microstructure. The goal was to produce materials featuring the granular…
Atomic layer deposition was used to synthesize niobium silicide (NbSi) films with a 1:1 stoichiometry, using NbF5 and Si2H6 as precursors. The growth mechanism at 200oC was examined by in-situ quartz crystal microbalance (QCM) and…
We use our recently proposed accelerated dynamics algorithm (Tiwary & van de Walle, 2011) to calculate temperature and stress dependence of activation free energy for surface nucleation of dislocations in pristine Gold nanopillars under…
An improved nanopatterning procedure has been developed to obtain YBCO nanowires with cross sections as small as 50x50 nm^2, protected by an Au capping layer. To probe the effective role of the Au protecting layer, we have measured the…
Top-down fabricated GaN nanowires, 250 nm in diameter and with various heights, have been used to experimentally determine the evolution of strain along the vertical direction of 1-dimensional objects. X-ray diffraction and…
The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…
Bulk nanocrystalline materials of small and medium ferromagnetic content were produced using severe plastic deformation by high-pressure torsion at roomtemperature. Giant magnetoresistive behavior was found for as deformed materials, which…
Ni/Al reactive multilayers are promising materials for applications requiring controlled local energy release and superior mechanical performance. This study systematically investigates the impact of compositional variations, ranging from…
In this article we present a neutron diffraction in-situ study of the thermal evolution and high-temperature structure of layered cobaltites Y(Ba, Sr)Co2 O5+{\delta}. Neutron thermodiffractograms and magnetic susceptibility measurements are…
We examine precipitate-induced dynamic strain aging in precipitation-hardened Al-Cu alloys by combining atomistic simulations, kinetic Monte Carlo, and analytical rate theory. Atomistic simulations were used to characterize (1) the…
The mechanism of the evolution of the deformed microstructure at the earliest stage of annealing where the existence of the lowest length scale substructure paves the way to the formation of the so-called subgrains, has been studied for the…
Nano-scale eutectics, such as rapid solidified Al-Si, exhibit enhanced yield strength and strain hardening but plasticity is limited by cracking of the hard phase (Si). Mechanisms that may suppress cracking and enable plastic co-deformation…
Reactive dual ion beam sputter deposition of AlN thin films was carried out for the analysis of surface growth characteristics by Atomic Force Microscopy. The variation of roughness as a function of deposition time was analysed by Dynamic…
Near-beta titanium alloys have shown low Young's modulus and good strength, making them excellent implant candidates. However, their processing using thermomechanical routes in single phase beta region results in heterogeneous…
The potential utilization of two-stage sintering for the production of highly dense and pure nickel diniobate (Ni4Nb2O9) ceramics with low firing temperature was demonstrated. Effects of designed sintering conditions on phase formation,…
Molecular dynamics simulations are used to investigate strain localization in a model nanocrystalline metal. The atomic mechanisms of such catastrophic failure are first studied for two grain sizes of interest. Detailed analysis shows that…