相关论文: Deformation mechanisms of Inconel-718 at nanoscale…
Inconel-718's compatibility with additive manufacturing (AM) has made it a center of attention for researchers. This paper focuses on how cooling rates affect the hardness of AM Inconel-718. To study the AM process, monocrystalline and…
The extreme and repeated temperature variation during additive manufacturing of metal parts has a large effect on the resulting material microstructure and properties. The ability to accurately predict this temperature field in detail, and…
Here we use large-scale molecular dynamics (MD) simulations of the high-rate deformation of nanocrystalline tantalum to investigate the processes associated with plastic deformation for strains up to 100%. We use initial atomic…
The Ni-base superalloy 718 is the most widely used material for turbomachinery in the aerospace industry and land-based turbines. Although the relationship between processing and the resulting properties is well known, an understanding of…
Understanding the mechanical properties of metals at extreme conditions is essential for the advancement of miniaturized technologies. As dimensions decrease, materials will experience higher strain rates at the same applied velocities.…
A central focus in high strain rate research is understanding the dynamic behavior of materials at strain rates where a strength upturn is observed. While strength upturns at strain rates of $10^3$ to $10^4~\mathrm{s}^{-1}$ have been widely…
The mechanical properties and deformation mechanisms of Cu/Nb nanoscale metallic multilayers (NMMs) manufactured by accumulative roll bonding (ARB) are studied at 25C and 400C. Cu/Nb NMMs with individual layer thicknesses between 7 and 63…
Nanostructures have the immense potential to supplant the traditional metallic structure as they show enhanced mechanical properties through strain hardening. In this paper, the effect of grain size on the hardening mechanism of Al-Cu…
The temperature dependence of mechanical properties of steel nanowires with varying carbon content was studied using molecular dynamics simulations. Four interatomic potentials were assessed, with the Modified Embedded Atom Method (MEAM)…
A clear understanding of the dynamic behavior of metals is critical for developing superior structural materials as well as for improving material processing techniques such as cold spray and shot peening. Using a high velocity (from 120…
It is now possible to create perfect crystal nanowires of many metals. The deformation of such objects requires a good understanding of the processes involved in plasticity at the nanoscale. Isotropic compression of such nanometre scale…
Aluminum-Copper (Al-Cu) alloys are essential materials for weight reduction critical structures in the aerospace and automotive industries, yet achieving their maximum ultrahigh-strength potential remains limited by nanoscale defect control…
Laser-based additive manufacturing offers a promising route for 3D printing of metallic parts. We evidence experimentally a particular columnar solidification microstructure in a Laser Powder-Bed Fusion processed Inconel 718 nickel-based…
Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…
We investigate the strain-rate-dependent mechanical behavior and deformation mechanisms of a refractory high entropy alloy, Ti29Zr24Nb23Hf24 (at.%), with a single-phase body-centered cubic (BCC) structure. High-temperature compression tests…
Austenitic stainless steels with low carbon have exceptional mechanical properties and are capable to reduce embrittlement, due to high chromium and nickel alloying, thus they are very attractive for efficient energy production in extreme…
Dislocation structures, chemical segregation, {\gamma ^{\prime}, {\gamma ^{\prime \prime}}, {\delta} precipitates and Laves phase were quantified within the microstructures of Inconel 718 (IN718) produced by laser powder bed fusion additive…
The governing mechanistic behaviour of Directed Energy Deposition Additive Manufacturing (DED-AM) is revealed by a combined in situ and operando synchrotron X-ray imaging and diffraction study of a nickel-base superalloy, IN718. Using a…
Interactions between an edge dislocation and a void in copper are investigated by means of molecular dynamics simulation. The depinning stresses of the leading partial and of the trailing partial show qualitatively different behaviors. The…
In the present study, molecular dynamics (MD) simulations have been performed to understand the effect of nanowire size, temperature and strain rate on the variations in dislocation density and deformation mechanisms in $<$100$>$ Cu…