相关论文: A Comparative Analysis of Inconel 718 Made by Addi…
There is an increasing interest in the fabrication of cement-based materials via additive manufacturing (AM) techniques. However, the processing-induced heterogeneities and interfaces represent a major challenge. The role of processing in…
The computational homogenization of elastoplastic polycrystals is a challenging task due to the huge number of grains required, their complicated interactions and due to the complexity of crystal plasticity models per se. Despite a few…
Achieving a combination of high mechanical strength and high electrical conductivity in low-weight Al alloys requires a full understanding of the relationships between nanoscaled features and physical properties. Grain boundary…
Two porous carbon-based samples doped with Au and Co are investigated. The neutron diffraction study reveals an amorphous structure of both samples. The Co-doped sample exhibits a long-range ferromagnetic (FM) ordering at 2.6 K. The NMR…
The effect of ultrasonic melting processing on three-dimensional architecture of intermetallic phases and pores in two multicomponent cast Al-5.0Cu-0.6Mn-0.5 Fe alloys is characterized using conventional microscopy and synchrotron X-ray…
Microwave energy can be advantageously used for materials processing as it provides high heating rates and homogeneous temperature field distribution. These features are partly due to the large microwave penetration depth into dielectric…
A comprehensive literature review on recently rediscovered Co- and/or CoNi-based superalloys, strengthened by the {\gamma}' phase, revealed a relationship between the configurational entropy of the system and the {\gamma}' solvus…
Exotic behaviour of mechanical metamaterials often relies on an internal transformation of the underlying microstructure triggered by its local instabilities, rearrangements, and rotations. Depending on the presence and magnitude of such a…
In the drive towards higher strength alloys, a diverse range of alloying elements is employed to enhance their strength and ductility. Limited solid solubility of these elements in steel leads to segregation during casting which affects the…
The influence of Zr additions (in the form of ZrH2 particles) on the microstructure and mechanical properties of IN718 Ni-based superalloy manufactured by selective laser melting was explored. Fully dense alloys could be obtained by careful…
The diffusion-controlled growth and microstructural evolution at the interface of aluminide coatings and different substrates such as Ni-base superalloys and steel are reviewed. Quantitative diffusion analysis indicates that the diffusion…
In our study, molecular dynamics (MD) simulations of laser powder bed fusion (LPBF) have been conducted on equimolar FeNiCr medium entropy alloy (MEA) powders. With the development of newer LPBF technologies capable of printing at the…
Understanding the composition evolution of grain boundaries and grain boundary precipitation at near-atomic scale in aluminum alloys is crucial to tailor mechanical properties and to increase resistance to corrosion and stress corrosion…
Annealing Mg-implanted homoepitaxial GaN at temperatures at or above 1400 {\deg}C eliminates the formation of inversion domains and leads to improved dopant activation efficiency. Extended defects in the form of inversion domains contain…
High entropy alloys (HEAs) represent a novel frontier in metallurgical advancements, offering exceptional mechanical properties owing to their unique multicomponent nature. This study explores a novel strategy utilising commodity powders -…
A new method of combined loading was developed for manufacturing large - scale ingot of alpha-beta titanium alloy Ti-6Al-4V with the diameter of the gauge 120 mm and the length 300 mm. The process includes torsion with simultaneous tensile…
The crystallization of complex, concentrated alloys can result in atomic-level short-range order, composition gradients, and phase separation. These features govern the properties of the resulting alloy. While nucleation and growth in…
Among the many additive manufacturing (AM) processes for metallic materials, selective laser melting (SLM) is arguably the most versatile in terms of its potential to realize complex geometries along with tailored microstructure. However,…
Additive manufacturing (AM; 3D Printing), a process which creates a part layer-by-layer, has the potential to improve upon conventional lightweight mirror manufacturing techniques, including subtractive (milling), formative (casting) and…
Strain heterogeneity at the microstructural level plays a vital role in the deformation and fracture behaviour of dual or multi-phase materials. In the present work, the strain heterogeneity, localization and partitioning arising at the…