相关论文: Tilted black-Si: ~0.45 form-birefringence from sub…

We present the design, fabrication and preliminary experiments of two-dimensional photonic crystal cavities made in nanoporous silicon luminescent at 700-800 nm. Enhancement in photoluminescence extraction efficiency at the resonant…

Large surface area applications such as high-efficiency > 26% solar cells require surface patterning with 1-10 micrometers periodic patterns at high fidelity over 1-10 cm^2 areas (before up scaling to 1 m^2) to perform at, or exceed, the…

Tin-containing nanocrystals, embedded in silicon, have been fabricated by growing an epitaxial layer of Si_{1-x-y}Sn_{x}C_{y}, where x = 1.6 % and y = 0.04 %, followed by annealing at various temperatures ranging from 650 to 900 degrees C.…

The problem of determining the porous silicon (PSi) optical constants, thickness, porosity, and surface quality using just reflectance data is board employing evolutionary algorithms. The reflectance measurements were carried out of PSi…

The development of broadband microresonator frequency combs at visible wavelengths is pivotal for the advancement of compact and fieldable optical atomic clocks and spectroscopy systems. Yet, their realization necessitates resonators with…

One-dimensional nanobeam photonic crystal cavities are fabricated in an Er-doped amorphous silicon nitride layer. Photoluminescence from the cavities around 1.54 um is studied at cryogenic and room temperatures at different optical pump…

Atomic-resolution scanning transmission electron microscopy (STEM) characterization requires precise tilting of the specimen to high symmetric zone axis, which is usually processed in reciprocal space by following the diffraction patterns.…

We report on a single-step, biomimetic approach for the realization of omnidirectional transparent antireflective glass. In particular, it is shown that circularly polarized ultrashort laser pulses produce self-organized nanopillar…

Structured illumination microscopy (SIM) achieves superresolution in fluorescence imaging through patterned illumination and computational image reconstruction, yet current methods require bulky, costly modulation optics and high-precision…

We have fabricated highly-luminescent samples with erbium-doped amorphous silicon sub-oxide (a-SiOx<Er>) layers on SiO2/Si substrates. The layers are designed to provide a resonance with large modal overlap with the active material and with…

We report on the development of an ultrafast beam shaper capable of generating Bessel beams of high cone angle that maintain a high-intensity hot spot with subwavelength diameter over a propagation distance in excess of 8~mm. This generates…

Laser Light Scattering (LLS) method, combined with a long-distance microscope was utilized to detect micrometer-sized particles on a smooth substrate. LLS was capable to detect individual particle release, shrink, or fragmentation during…

Ferroelectric Al$_{1-x}$B$_x$N thin films are grown on highly doped and plasma treated (100) n-type Si. We demonstrate ferroelectricity for x = <0.01, 0.02, 0.06, 0.08, 0.13, and 0.17 where the n-type Si is both the substrate and bottom…

Using a custom-built scanning system, we generated maps of birefringence on reflection at $\lambda=1064$~nm from single-crystal GaAs/Al$_{0.92}$Ga$_{0.08}$As Bragg reflectors (henceforth ``AlGaAs coatings''). Ten coatings were bonded to…

Almost one and a half centuries ago, Ernst Abbe [1] and shortly after Lord Rayleigh [2] showed that when an optical lens is illuminated by a plane wave, a diffraction-limited spot with a radius 0.61*lambda/sin(alpha) is obtained, where…

Laser nitriding represents a versatile approach for tailoring the surface properties of metals. Up to now, its effect on the superconducting response of niobium nitrides remains largely unexplored. In this work, the nitriding process of…

InN nanowires were grown on Si<111> and Si<100> substrates by plasma-assisted molecular beam epitaxy using a thin AlN buffer layer at temperatures compatible with the thermal budget limitation imposed by Back-End-Of-Line processing.…

Silicon nanowires are prepared by the method of the two-step metal-assisted wet chemical etching. We have analyzed the structure of solid, rough and porous nanowire surfaces of boron-doped silicon substrates with resistivities of \rho >…

The limited resolution of a conventional optical microscope stems from the fact that the subwavelength information of an object is carried by evanescent waves, which exponentially decays in space and cannot reach the imaging plane. We…

Subwavelength diffractive optics known as meta-optics have demonstrated the potential to significantly miniaturize imaging systems. However, despite impressive demonstrations, most meta-optical imaging systems suffer from strong chromatic…