相关论文: Plasmonic Titanium Nitride via Atomic Layer Deposi…

Ca- and Zn-subsituted Y1-xCaxBa2(Cu1-yZny)O7-delta (x = 0, 0.05 and y = 0, 0.02, 0.04, 0.05) thin films were grown on SrTiO3 (100) substrates using the pulsed laser deposition (PLD) technique. Effects of various growth parameters on the…

The most direct definition of a patterning process' resolution is the smallest half-pitch feature it is capable of transferring onto the substrate. Here we demonstrate that thermal Scanning Probe Lithography (t-SPL) is capable of…

In this work, sintered polycrystalline cubic boron nitride (cBN) compacts, with titanium carbonitride (TiC0.7N0.3) and titanium nitride (TiN), respectively, as binders, were prepared at temperature of 1450{\deg}C and pressure of 5.5 GPa…

Aluminum nitride (AlN) is an extremely promising material for integrated photonics because of the combination of strong \c{hi}2 and \c{hi}3 nonlinearities. However, the intrinsic hardness of the material and charging effects during electron…

Scandium aluminum nitride (ScAlN) has recently emerged as an attractive material for integrated photonics due to its favorable nonlinear optical properties and compatibility with CMOS fabrication. Despite the promising and versatile…

This study investigates the molecular beam epitaxial (MBE) growth of titanium nitride (TiN) thin films, achieving a high residual resistivity ratio (RRR) of 15.8. We observed a strong correlation between growth temperature and crystalline…

Here we systematically explore the use of pulsed laser deposition technique (PLD) to grow three basic oxides that have rocksalt structure but different chemical stability in the ambient atmosphere: NiO (stable), MnO (metastable) and EuO…

An original modification of the standard Pulse Laser Deposition (PLD) method for preparing both undoped and indium doped zinc oxide (ZnO:In) thin films at low substrate temperature is proposed. This preparation method does not demand any…

The behavior of plasmonic antennas is influenced by a variety of factors, including their size, shape, and material. Even minor changes in the deposition parameters during the thin film preparation process may have a significant impact on…

Zirconium nitride (ZrN) is a refractory material with good mechanical and thermal properties. It is therefore a good candidate for hard surface treatment at high temperature. In this work, we report the growth and characterization of ZrN by…

High-quality thin films of the ferromagnetic-insulator europium(II) sulfide (EuS) were fabricated by pulsed laser deposition on Al2O3 (0001) and Si (100) substrates. A single orientation was obtained with the [100] planes parallel to the…

We report on magnetron deposition of thin superconducting rhenium films on sapphire substrates. During the deposition, substrates were held at ambient temperature. Critical temperature of the films is Tc~3.6 K. Films have polycrystalline…

Lithium niobate-on-insulator (LNOI) is an emerging photonic platform with high potential for scalable quantum information processing due to its strong second-order nonlinearity. However, little progress has been made in developing on-chip…

Stabilized FeSe thin films in ambient pressure with tunable superconductivity would be a promising candidate for superconducting electronic devices yet its superconducting transition temperature (Tc) is below 10 K in bulk materials. By…

Thin films of functional inorganic materials, particularly oxides, play a vital role in optoelectronics, enabling applications that range from active optical components to MEMS-based architectures. Achieving high aspect ratio patterning of…

Inelastic electron tunneling and surface-enhanced optical spectroscopies at the molecular scale require cryogenic local temperatures even under illumination - conditions that are challenging to achieve with plasmonically resonant metallic…

Thin films of ZnFe2O4 deposited by pulsed laser technique are here demonstrated as one of the interesting materials for sensing of ethanol. The response transients were fitted well to one-site Langmuir adsorption model. Activation energies…

The development of large-scale quantum processors benefits from superconducting qubits that can operate at elevated temperatures and be fabricated with scalable, foundry-compatible processes. Atomic layer deposition (ALD) is increasingly…

Heteroepitaxial growth of selected group IV-VI nitrides on various orientations of sapphire (\alpha-Al2O3) is demonstrated using atomic layer deposition. High quality, epitaxial films are produced at significantly lower temperatures than…

We deposited thin layers of CdS and ZnS nanoparticles embedded in a thermoplastic cyclo-olephin copolymer (COC) with elevated optical transparency and highly bio-compatible. The nanoparticles were obtained by thiolate precursors previously…