相关论文: Inverse designed metalenses with extended depth of…
We report an inverse-designed, high numerical aperture (~0.44), extended depth of focus (EDOF) meta-optic, which exhibit a lens-like point spread function (PSF). The EDOF meta-optic maintains a focusing efficiency comparable to that of a…
Metasurface optics have demonstrated vast potential for implementing traditional optical components in an ultra-compact and lightweight form factor. Metasurface lenses, also called metalenses, however, suffer from severe chromatic…
Extended depth of focus (EDOF) optics can enable lower complexity optical imaging systems when compared to active focusing solutions. With existing EDOF optics, however, it is difficult to achieve high resolution and high collection…
Wide-angle optical functionality is crucial for implementation of advanced imaging and image projection devices. Conventionally, wide-angle operation is attained by complicated assembly of multiple optical elements. Recent advances in…
A conventional refractive lens surface can act as a positive (converging) or negative (diverging) lens, but the same surface cannot act as both. We show that a geometric phase metasurface lens can have the unique property of acting both as…
The inverse design of optical metasurfaces is a rapidly emerging field that has already shown great promise in miniaturizing conventional optics as well as developing completely new optical functionalities. Such a design process relies on…
Optical metasurfaces have been heralded as the platform to integrate multiple functionalities in a compact form-factor, potentially replacing bulky components. A central stepping stone towards realizing this promise is the demonstration of…
Conventional optical zoom system is bulky, expensive and complicated for real time adjustment. Recent progress in the metasurface research has provided a new solution to achieve innovative compact optical systems. In this paper, we propose…
Metasurface-based lenses (metalenses) offer specific conceptual advantages compared to ordinary refractive lenses. For example, it is possible to tune the focal length of a metalens doublet by varying the relative angle between the two…
Metalens as one of the most popular applications of emmerging optical metasurfaces has raised widspread interest recently. With nano structures fully controlling phase, polarization and transmission, metalens has achieved comparable…
Metasurface optics provide an ultra-thin alternative to conventional refractive lenses. A present challenge is in realizing metasurfaces that exhibit tunable optical properties and achromatic behavior across the visible spectrum. Here, we…
Recent advances in meta-optics have enabled diverse functionalities in compact optical devices; however, conventional forward design approaches become inadequate as device complexity and scale grow. Inverse design offers a powerful…
Metasurfaces have emerged as a powerful platform for compact optical sensors by replacing bulky lenses with flat arrays of subwavelength nanostructures. In precision optical metrology, the simultaneous mapping of a beam's polarization state…
We propose an efficient inverse design approach for multifunctional optical elements based on adaptive deep diffractive neural networks (a-D$^2$NNs). Specifically, we introduce a-D$^2$NNs and design two-layer diffractive devices that can…
Dielectric metasurfaces are two-dimensional structures composed of nano-scatterers that manipulate phase and polarization of optical waves with subwavelength spatial resolution, enabling ultra-thin components for free-space optics. While…
A lens performs an approximately one-to-one mapping from the object to the image planes. This mapping in the image plane is maintained within a depth of field (or referred to as depth of focus, if the object is at infinity). This…
Meta-optics has achieved major breakthroughs in the past decade; however, conventional forward design faces challenges as functionality complexity and device size scale up. Inverse design aims at optimizing meta-optics design but has been…
This study formulates a volumetric inverse-design methodology to generate a pair of complementary focusing metalenses for terahertz imaging: the two lenses exhibit equal and opposite shifts in focal length with frequency. An asymmetry…
In this paper we present an inverse-designed 3D-printed all-dielectric stretchable millimeter wave metalens with a tunable focal distance. Computational inverse-design method is used to design a flat metalens made of disconnected building…
Multifocal lens, which focus incident light at multiple foci, are widely used in imaging systems and optical communications. However, for the traditional design strategy, it combines several lenses that have different focal points into a…