相关论文: THz optical properties of polymethacrylates after …
The fabrication of terahertz (THz) optics with arbitrary shapes via poly-methacrylate-based stereolithography is very attractive as it may offer a rapid, low-cost avenue towards optimized THz imaging applications. In order to design such…
Additive manufactured THz optics have been introduced as an efficient alternative to their commercial counterparts. Among various additive manufacturing methods, stereolithography provides superior spatial resolution and surface finish.…
Polarisation analysis of synchrotron THz radiation was carried out with a standard stretched polyethylene polariser and revealed that the linearly polarised (horizontal) component contributes up to 22 +/- 5% to the circular polarised…
Triethylsilylethynyl anthradithiophene (TESADT) holds considerable promise for organic transistor applications due to the high electrical mobilities attained by post-deposition crystallization using solvent vapour annealing. We have studied…
Integration of thin-film oxide piezoelectrics on glass is imperative for the next generation of transparent electronics to attain sensing and actuating functions. However, their crystallization temperature (above 650 {\deg}C) is…
Many components for terahertz (THz) optical filtering are mechanically fragile and are hard to produce with large aperture, making them unsuitable for applications where larger THz beam diameter is required. In this work, the THz optical…
Indium-tin oxide (ITO) is a crucial functional layer for the optoelectronic applications, such as non-volatile color display thin films based on the ITO/phase-change material (PCM)/ITO/reflective metal multilayer structures on a silicon…
Poly(ethylene terephthalate) (PET) is a semi--crystalline polymer that can be crystallized to different degrees heating from the amorphous state. Even when primary crystallization has been completed, secondary crystallization can take place…
The thermal conductivity (k) of polycrystalline silicon carbide thin films is relevant for thermal management in emerging silicon carbide applications like MEMS and optoelectronic devices. In such films k can be substantially reduced by…
Thermally stable polymers have attracted a lot of interest due to their potential use as the active component in electronic, optical and optoelectronic applications, such as light-emitting diodes, light emitting electrochemical cells,…
The oxidation behavior of W-Zr thin-film metallic glasses (TFMGs) with 32, 48 and 61 at.% Zr, prepared by dc magnetron co-sputtering, was comprehensively studied after annealing in synthetic air. The study focuses on the effect of the…
Granular nanostructure of electron beam resist had limited the ultimate resolution of electron beam lithography. We report a thermal process to achieve a uniform and homogeneous amorphous thin film of poly methyl methacrylate electron…
Terahertz (THz) radiation is a powerful tool with widespread applications ranging from imaging, sensing, and broadband communications to spectroscopy and nonlinear control of materials. Future progress in THz technology depends on the…
This investigation deals with the effect of annealing temperature on the structural, topographical and optical properties of Zinc Oxide thin films prepared by sol gel method. The structural properties were studied using X-ray diffraction…
Four series of tensile loading-unloading tests are performed on isotactic polypropylene in the sub-yield domain of deformations at room temperature. In the first series, injection-molded specimens are used as produced, whereas in the other…
The present work is essentially focused on the study of optical and structural properties of hydrogenated amorphous silicon thin films (a-Si:H) prepared by radio-frequency cathodic sputtering. We examine separately the influence of hydrogen…
We describe a novel artificial dielectric material which has applications at millimetre and submillimetre wavelengths. The material is manufactured from layers of metal mesh patterned onto thin polypropylene sheets which are then bonded…
Terahertz coloured digital holography ranging from 1.39 THz up to 4.25 THz is demonstrated. It is shown that it can be applied for the investigation of low-absorbing objects, and it is illustrated via inspection of stacked graphene layers…
Ellipsometry is a technique whereby the measurement of the two orthogonal polarization components of light reflected at glancing incidence allows a characterization of the optical properties of a material at a particular frequency.…
Optical properties of refractory intermetallic thin films of Au$_{3}$Zr were experimentally investigated for the first time, which show distinctive plasmonic properties in the visible and near infrared region. The films were fabricated…