相关论文: Mode II fracture of an elastic-plastic sandwich la…
The mode I crack tip asymptotic response of a solid characterised by strain gradient plasticity is investigated. It is found that elastic strains dominate plastic strains near the crack tip, and thus the Cauchy stress and the strain state…
This work models brittle fracture using a linearized surface-substrate theory in which the crack faces possess surface stresses derived from a surface strain-gradient elastic energy. The model incorporates surface stretching, curvature, and…
The fracture toughness for a mode I/II crack propagating in a ductile material has been subject to numerous investigations. However, the influence of the material hardening law has received very limited attention, with isotropic hardening…
Thick adhesive layers have potential structural application in ship construction for the joining of a composite superstructure to a steel hull. The purpose of this study is to develop a mechanics model for the adhesive fracture of such lap…
The effects of shear on energy release rate and mode mixity in a symmetric sandwich beam with isotropic layers and a debond crack at the face sheet/core interface are investigated through a semi-analytic approach based on two-dimensional…
A geometrically nonlinear sandwich beam model founded on the modified couple stress Timoshenko beam theory with K\'arm\'an kinematics is derived and employed in the analysis of periodic sandwich structures. The constitutive model is based…
We formulate a theoretical model of the shear failure of a thin film tethered to a rigid substrate. The interface between film and substrate is modeled as a cohesive layer with randomly fluctuating shear strength/fracture energy. We…
The present work deals with the problem of a semi-infinite crack steadily propagating in an elastic body subject to plane-strain shear loading. It is assumed that the mechanical response of the body is governed by the theory of…
This paper investigates the effects of plasticity on the effective fracture toughness. A layered material is considered as a modelling system. An elastic-plastic phase-field model and a surfing boundary condition are used to study how the…
A multilayered plate theory which uses transverse shear warping functions issued from three-dimensional elasticity is presented. Two methods to obtain these transverse shear warping functions are detailed. The warping functions are issued…
The accurate measurement of fracture resistance in elastomers is essential for predicting the mechanical limits of soft devices. Usually, this is achieved by performing tearing or peeling experiments on thin-sheet samples. Here, we show…
The method of iterated conformal maps is developed for quasi-static fracture of brittle materials, for all modes of fracture. Previous theory, that was relevant for mode III only, is extended here to mode I and II. The latter require…
In this study, we use the mechanism-based strain gradient plasticity theory to evaluate both crack tip dislocation density behaviour and the coupled effect of the material plastic properties and the intrinsic material length on non-linear…
A phase-field description of brittle fracture is employed in the reported four-point bending analyses of monolithic and laminated glass plates. Our aims are: (i) to compare different phase-field fracture formulations applied to thin glass…
This article present the double-periodical lattice made of infinite elastic fibers that withstand bending and tension. The model describes the elastic properties of flat periodic structure. With this model the behavior of a two-dimensional…
The interaction of crack fronts with asperities is central to the criteria of fracture in heterogeneous materials and for predicting fracture surface formation. It is known how dynamic crack fronts respond to small, 1st-order,…
We explore the Mode I fracture toughness of a polymer gel containing a semi-infinite, growing crack. First, an expression is derived for the energy release rate within the linearized, small-strain setting. This expression reveals a crack…
We present a gradient-based theoretical framework for predicting hydrogen assisted fracture in elastic-plastic solids. The novelty of the model lies in the combination of: (i) stress-assisted diffusion of solute species, (ii) strain…
The response of amorphous materials to an applied strain can be continuous, or instead display a macroscopic stress drop when a shear band nucleates. Such discontinuous response can be observed if the initial configuration is very stable.…
We present a detailed study of a two-dimensional minimal lattice model for the description of mud cracking in the limit of extremely thin layers. In this model each bond of the lattice is assigned to a (quenched) breaking threshold.…