相关论文: Molecular Beam Epitaxy Growth of Scandium Nitride …

We report epitaxial growth and characterization of GaN thin films on sapphire (0001) substrates using low temperature GaN intermediate layer by plasma assisted molecular beam epitaxy (PA-MBE) technique. As grown and annealed GaN thin films…

Bulk Scandium trifluoride ($\mathrm{ScF_3}$) is known for a pronounced negative thermal expansion (NTE) over a wide range of temperature, from $10~\mathrm{K}~\text{to}~ 1100~\mathrm{K}$. The structure of $\mathrm{ScF_3}$ can be described as…

NbN films are grown on c-plane sapphire substrates by molecular beam epitaxy. The structural and superconducting properties of the film are characterized to demonstrate that growth parameters such as substrate temperature and active…

By employing a mixed SnO$_2$+Sn source, we demonstrate suboxide molecular beam epitaxy growth of phase-pure single crystalline metastable SnO(001) thin films at a growth rate of ~1.0nm/min without the need for additional oxygen. These films…

Cubic InN films were grown on top of a c-GaN buffer layer by rf-plasma assisted MBE at different growth temperatures. X-Ray diffraction investigations show that the c-InN layers consist of a nearly phase-pure zinc blende (cubic) structure…

2H-TaS$_2$ few layers have been grown epitaxially onto GaN(0001). A high substrate growth temperature of 825$^{\circ}$C induces best structural properties of the overlayer, as revealed by in-situ electron diffraction (RHEED and LEED). The…

Epitaxial growth of orthorhombic SnSe on cubic substrates is challenging due to lattice-symmetry mismatch and anisotropic bonding. Here we demonstrate that epitaxial films with sharp interfaces can be achieved for layered SnSe grown…

An in situ study of the epitaxial growth of SmN thin films on Ga-polar GaN (0001)templates by molecular beam epitaxy is reported. Using X-ray photoelectron spectroscopy we found that Ga segregates at the surface during the first stages of…

Two-dimensional (2D) ferromagnetic materials have been exhibiting promising potential in applications, such as spintronics devices. To grow epitaxial magnetic films on silicon substrate, in the single-layer limit, is practically important…

Single-phase Ni0.46Mn0.54As films with strained C1b symmetry have been successfully grown on GaAs (001) substrates by molecular-beam epitaxy. The epitaxial relationship between the film and the substrate has been studied using synchrotron…

Epitaxial Sc$_x$Al$_{1-x}$N thin films of ~100 nm thickness grown on metal polar GaN exhibit significantly enhanced relative dielectric permittivity ($\epsilon_r$) values relative to AlN. $\epsilon_r$ values of ~17 to 21 for Sc contents of…

Films of (111)-textured Cu, Ni, and Cu$_x$Ni$_y$ were evaluated as substrates for chemical vapor deposition of graphene. A metal thickness of 400 nm to 700 nm was sputtered onto a substrate of $\alpha-$Al$_2$O$_3$(0001) at temperatures of…

Epitaxial films including bulk-like cubic and wurtzite polymorphs of MnSb have been grown by molecular beam epitaxy on GaAs via careful control of the Sb4/Mn flux ratio. Nonzero-temperature density functional theory was used to predict ab…

FeSn is a room-temperature antiferromagnet composed of alternating Fe3Sn kagome layers and honeycomb Sn layers. Its distinctive lattice allows the formation of linearly dispersing Dirac bands and topological flat bands in its electronic…

We report molecular beam epitaxial growth of a SnTe (111) layer on a CdTe template, fabricated by depositing it on a GaAs (111)A substrate, instead of BaF$_2$ which has been conventionally used as a substrate. By optimizing temperatures for…

N-polar aluminum nitride (AlN) is an important building block for next-generation high-power RF electronics. We report successful homoepitaxial growth of N-polar AlN by molecular beam epitaxy (MBE) on large-area cost-effective N-polar AlN…

A major issue in the development of the technology of nitride based materials is the choice of substrate. The structural and optical properties of the layers are intimately connected to the substrate material used in the epitaxial growth.…

We report the molecular beam epitaxy of Bi_1-xSb_x thin films ($0 \leq x \leq 1$) on (0001) sapphire substrates using a thin (Bi,Sb)$_2$Te$_3$ buffer layer. Characterization of the films using reflection high energy diffraction, x-ray…

To contemplate an alternative approach for the minimization of diffusion at high temperature depositions, present findings impart viability of room-temperature deposited reactively sputtered ScN thin film samples. The adopted room…

This work investigates the effect of a scandium nitride buffer layer on the superconducting properties of niobium nitride thin films. The use of a ScN buffer layer significantly improves the characteristics of 29 nm thick NbN films: the…