相关论文: Intracavity Brillouin gain characterization based …
We observe an interference pattern using a simple fiber-optic interferometer consisting of an electrical spectrum analyzer and a narrowband light source, which is commonly employed for observing the Brillouin gain spectrum. This…
We discuss a class of lasing modes created by a spatially inhomogeneous gain profile. These lasing modes are "extra modes", in addition to, and very different from, conventional lasing modes, which arise from the passive cavity resonances.…
Thermal properties are of great interest in modern electronic devices and nanostructures. Calculating these properties is straightforward when the device is made from a pure material, but problems arise when alloys are used. Specifically,…
Time-domain Brillouin scattering has proved to be an unique tool for determining depth dependent material properties. Here, we show the influence of doping level in GaAs on Brillouin oscillations. Measurements were performed on intrinsic,…
Full-field imaging through scattering media is fraught with many challenges. Despite many achievements in recent years, current imaging methods are too slow to deal with fast dynamics that occur for example in biomedical imaging. Here we…
A detailed analysis of the use of an optical cavity to enhance picosecond ultrasonic signals is presented. The optical cavity is formed between a distributed Bragg reflector (DBR) and the metal thin film samples to be studied. Experimental…
Microcavity-based microlasers are the kernel light sources for integrating photonics and optoelectronics. The traditional pump light frequency locking mainly utilizes a complex system with optoelectronic feedback, which requires a high-cost…
We develop a general method of calculating Stimulated Brillouin Scattering (SBS) gain coefficient in axially periodic waveguides. Applying this method to a silicon periodic waveguide suspended in air, we demonstrate that SBS nonlinearity…
The topology of the electronic band structure of solids can be described by its Berry curvature distribution across the Brillouin zone. We theoretically introduce and experimentally demonstrate a general methodology based on the measurement…
The coupled cavity model for calculation characteristics of inhomogeneous disc-loaded waveguides with taking into account the rounding of the disk hole edges was developed. On the base of this model simulation of section tuning process with…
A non-resonant cavity to build up laser intensity is modeled, developed and tested. It can be used for overlapping multiple lasers of different wavelengths, increasing their intensities by over an order of magnitude while maintaining good…
Cavity optomechanics allows the parametric coupling of phonon- and photon-modes in microresonators and is presently investigated in a broad variety of solid-state systems. Optomechanics with superfluids has been proposed as a path towards…
We develop a statistical theory of stimulated Brillouin backscatter (BSBS) of a spatially and temporally partially incoherent laser beam for laser fusion relevant plasma. We find a new collective regime of BSBS (CBSBS) with intensity…
Raman-gain-enhanced near-field optomechanical transduction between a movable optical cavity and SiN-membrane resonator is demonstrated. The Raman gain compensates for the intrinsic loss of the cavity and amplifies the optomechanical…
We create a spatially homogeneous field inside of a ring cavity by combining two transverse modes generated by a single laser through modulation. The interference term between the two modes averages out because of the frequency difference…
Absorption of ultrashort laser pulses in a metallic grating deposited on a transparent sample launches coherent compression/dilatation acoustic pulses in directions of different orders of acoustic diffraction. Their propagation is detected…
Strong acousto-optic interaction in silicon-based waveguides generally requires releasing of the silicon core to avoid mechanical leakage into the underlying silica substrate. This complicates fabrication, limits thermalization, reduces the…
Stimulated Brillouin scattering (SBS) microscopy enables label-free biomechanical imaging, with Brillouin gain serving as a critical contrast parameter for quantitative analysis. However, the influence of sample-induced refractive index…
We present a new optical arrangement which allows to avoid the broadening by finite aperture in Brillouin spectroscopy. In this system, all the rays scattered at the same angle by the whole scattering volume are collected on a single pixel…
Optical vortices, which have been extensively studied over the last decades, offer an additional degree of freedom useful in many applications, such as optical tweezers and quantum control. Stimulated Brillouin scattering, providing a…